ADJUSTMENT GP-HYDRAULIC TRACK 2540665 - Caterpillar

VALIGN="middle" ALIGN="center">Yes(1)(3) Yes(1)(3)
Fuel Utilization (Fuel Burn/Fuel Burn Rate) No(1) No(1) No(1) No(1) No(1)
Kilowatt-hours(kWh) No PW 2.0 PW 2.1 EMCP 3.2/3.3 EMCP 4.2/4.3/4.4
Kilovolt-ampere-reactive-hours(kVArh) No No PW 2.1(2) No EMCP 4.2/4.3/4.4(2)
Average Power Factor No No PW 2.1(2) No EMCP 4.2/4.3/4.4(2)
Average kW/Average kW% No PW 2.0 PW 2.1(2) EMCP 3.2/3.3 EMCP 4.2/4.3/4.4(2)
Fuel Level(%) No PW 2.0 (4)(5) PW 2.1(5) EMCP 3.2/3.3(4)(5) EMCP 4.2/4.3/4.4(5)
Battery Voltage(Vdc) Feature supported independent of EMCP/PW or engine control.
Alerts(Aide, Advisor)
Fault Codes Yes(1) Yes(1)(3) Yes(1)(3) Yes(1)(3) Yes(1)(3)
Geo Boundary(Entry, Exit) Feature supported independent of EMCP/PW or engine control.
Engine Status(Not ready to Run) No(1) Yes(1) Yes(1) Yes(1) Yes(1)
Engine Status(Engine Running, Engine Stopped) Yes(1) Yes(1) Yes(1) Yes(1) Yes(1)
Engine Status(Engine in Cool Down) No(1) No(1) Yes(1)(2) No(1) Yes(1)(2)
Device Status(Not Responding) Feature supported independent of EMCP/PW or engine control.
Low System Battery Voltage Feature supported independent of EMCP/PW or engine control.
Power Loss(Asset Move, Power Loss, Power Restore) Feature supported independent of EMCP/PW or engine control.
Low Fuel Level No PW 2.0(4)(5) PW 2.1(5) EMCP 3.2/3.3(4)(5) EMCP 4.2/4.3/4.4(5)
Advanced PL Features (Vitals, Aide, Advisor)
Customer Configuration Tool(Aide/Advisor) Feature supported independent of EMCP/PW or engine control.
Snapshot No(1) Yes(1)(6) Yes(1)(6) Yes(1)(6) Yes(1)(6)
Status Parameters (Min,Max,Average) (Vitals/Aide) Yes(1)(6) Yes(1)(6) Yes(1)(6) Yes(1)(6) Yes(1)(6)
Data Visualization tool (Advisor) Feature supported independent of EMCP/PW or engine control.
Value Point Indicator (Min,Max,Average)(Advisor) Yes(1)(6) Yes(1)(6) Yes(1)(6) Yes(1)(6) Yes(1)(6)
Histograms(Advisor) Yes(1)(6) Yes(1)(6) Yes(1)(6) Yes(1)(6) Yes(1)(6)
(1) Feature could be supported by engine control.
(2) Feature requires latest EMCP/PW software installed.
(3) Specific codes supported depends EMCP/PW hardware and software installed.
(4) Feature Supported ONLY with resistive fuel level senders.
(5) Fuel level sender must be wired into analog input on EMCP/PW and analog input must be configured properly using the service tool/display.
(6) Parameter set (Generator, Engine) available for Advanced PL Features depends EMCP/PW and engine control installed.