ADJUSTMENT GP-HYDRAULIC TRACK 2979153 - Caterpillar

Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00677696
Attach lifting slings and a suitable lifting device to the heat exchanger (29). The weight of the heat exchanger and the bracket is 77 kg (170 lb).
Install two spacers (28) on the bracket (29) .
Illustration 2 g00677687
Lift the heat exchanger (25) into position.
Install four bolts and washers (27) .
Install hose (24) and tighten the clamp (26) .
Illustration 3 g00677675
Install the regulator housing (23) .
Install four bolts and the washers (20) .
Install the hose (22) and tighten the clamp (21) .
Illustration 4 g00677660
Connect the hose (16) .
Tighten the clamp (18) .
Connect the electrical connector (19) .
Reposition two hoses (17) .
Install two spacers (15) .
Install two bolts and washers (14) .
Illustration 5 g00677647
Connect hose (12) .
Tighten clamp (11) .
Illustration 6 g00677572
Install two bolts and washers (6) .
Position the fuel filter base and the fuel filter element in the correct location and install the two bolts and washers (8) .
Connect hose (9) .
Connect hose (10) .
Tighten clamp (7) .
Connect hose (2) .
Tighten clamp (5) .
Connect two tubes (3) .
Illustration 7 g00677654
Close valve (13) .