ADJUSTMENT-YM 5096291 - Caterpillar

2. Start the machine. Move the machine to the rear and up on tooling (A). Put tooling (B) in position under the bevel gear case as shown. Move the machine slowly forward until tooling (A) can be removed from under the tracks. 3. Remove guard assemblies (1) and (2) from each side of the machine. 4. Remove bolt (3), nuts and sleeve (4) from each end of the equalizer spring. 5. Disconnect grease tube (5) from the equalizer spring. Disconnect the clip that holds tube (5) from the engine oil pan plate. 6. Remove twenty bolts (6) and