AFTERCOOLER GP-RAW WATER 1983433 - Caterpillar

Illustration 2 g01769014
Detail AManifold
Illustration 3 g01769016
Detail BManifold (12) Torque for three plug assemblies ... 18 2 N m (13.3 1.5 lb ft)
Illustration 4 g01767361
View C-C (13) Apply a continuous bead of 4C-9612 Silicone Sealant to the T-shaped joints immediately prior to the installation of the gasket for the oil pan (14). The application of the sealant should cover the entire width of the T-shaped joints. (16) Apply 4C-9612 Silicone Sealant immediately prior to assembling the torque converter housing (15). After assembly of the torque converter housing, remove excess sealant from the flange with a straight edge. Apply the sealant again.
Illustration 5 g01767360
View D-D
Illustration 6 g01767359
(17) Torque for eight plug assemblies ... 36.75 1.75 N m (27.11 1.29 lb ft) (18) Torque for three plug assemblies ... 8.5 0.5 N m (75.2 4.4 lb in)Note: Apply a continuous bead of 4C-9612 Silicone Sealant to spot face of the case and to the washer face of the bolt. After tightening the bolt, remove the excess sealant. (19) Torque for two bolts ... 100 20 N m (74 15 lb ft) (20) 277-0361 Spring Length under test force ... 36.5 mm (1.44 inch) Test force ... 158.96 15.90 N (35.7 3.6 lb) Free length after test ... 39.5 mm (1.56 inch) Outside diameter ... 13.36 0.25 mm (0.526 0.010 inch)
Illustration 7 g01767337
(21) 277-0362 Spring Length under test force ... 68.20 mm (2.685 inch) Test force ... 158.96 15.90 N (35.7 3.6 lb) Free length after test ... 72 mm (2.83 inch) Outside diameter ... 14.12 0.25 mm (0.556 0.010 inch) (22) 277-0385 Spring Length under test force ... 26 mm (1.02 inch) Test force ... 158.96 15.90 N (35.7 3.6 lb) Free length after test ... 29.9 mm (1.18 inch) Outside diameter ... 13.17 0.25 mm (0.519 0.010 inch) (23) 277-0386 Spring Length under test force ... 74.30 mm (2.925 inch) Test force ... 279.98 28.00 N (62.9 6.3 lb) Free length after test ... 80 mm (3.15 inch) Outside diameter ... 14.50 0.25 mm (0.571 0.010 inch)