2108124 AFTERCOOLER AS Caterpillar parts
320C, 320C FM, 320C L
Rating:
Alternative (cross code) number:
CA2108124
210-8124
2108124
CA2108124
210-8124
2108124
Weight: 13 pounds 6 kg.
EXCAVATOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
WZCNLXLX Intercooler Charge Air Cooler 210-8124 2108124 for CAT Excavator E320CX E320C
WZCNLXLX Item Name:Cooler || Item Number:210-8124 2108124 || Application:for CAT Excavator E320CX E320C || Note: If you are unsure if the product is suitable.In order not to delay your use of the parts, please provide your engine nameplate or serial number and part number, and we will help you confirm if it is suitable. To avoid unnecessary returns, please check the product image and part number to ensure it is the product you want.Thank you for your support and understanding! || Tip: Please contact us - we are a professional sales team and we have many products to offer to you. Many buyers are very satisfied with our service. You can get first-class products and high-quality services from us, believe me, you will have a pleasant shopping experience here.
WZCNLXLX Item Name:Cooler || Item Number:210-8124 2108124 || Application:for CAT Excavator E320CX E320C || Note: If you are unsure if the product is suitable.In order not to delay your use of the parts, please provide your engine nameplate or serial number and part number, and we will help you confirm if it is suitable. To avoid unnecessary returns, please check the product image and part number to ensure it is the product you want.Thank you for your support and understanding! || Tip: Please contact us - we are a professional sales team and we have many products to offer to you. Many buyers are very satisfied with our service. You can get first-class products and high-quality services from us, believe me, you will have a pleasant shopping experience here.
ZGZJYBL Intercooler Charge Air Cooler For CAT E320CX E320C Excavator 210-8124 2108124
ZGZJYBL Item Name:Cooler || Item Number:210-8124 2108124 || Application:for CAT Excavator E320CX E320C || Attention: If you are unsure if the product is suitable for your machine model. In order not to delay your use of the parts, please provide your engine nameplate or serial number and part number, and we will help you confirm if it is suitable. To avoid unnecessary returns, please carefully check the product image and part number to ensure that it is the product you want. Thank you for your support and understanding! || Tip: If you need any other parts, please contact us - we are a professional sales team and have many products to offer to you. Many buyers are very satisfied with our service. You can get first-class products and high-quality services from us, believe me, you will have a pleasant shopping experience here.
ZGZJYBL Item Name:Cooler || Item Number:210-8124 2108124 || Application:for CAT Excavator E320CX E320C || Attention: If you are unsure if the product is suitable for your machine model. In order not to delay your use of the parts, please provide your engine nameplate or serial number and part number, and we will help you confirm if it is suitable. To avoid unnecessary returns, please carefully check the product image and part number to ensure that it is the product you want. Thank you for your support and understanding! || Tip: If you need any other parts, please contact us - we are a professional sales team and have many products to offer to you. Many buyers are very satisfied with our service. You can get first-class products and high-quality services from us, believe me, you will have a pleasant shopping experience here.
Information:
Illustration 1 g01318948
Connections of the automatic retarder solenoidThis diagnostic code is associated with the automatic retarder solenoid. The FMI 05 means that the ECM has determined that an open in the circuit exists. The possible causes of this diagnostic code are listed below:
The energize circuit of the solenoid is open.
The return circuit of the solenoid is open.
The solenoid has failed.
The ECM has failed. This is unlikely. Note: The following test procedure may create other diagnostic codes. Ignore these created diagnostic codes and clear these diagnostic codes when the original diagnostic code has been corrected. Ensure that the diagnostic code of CID 0711 FMI 05 is active before performing this procedure.Note: Use a digital multimeter for the measurements in this procedure.Test Step 1. CHECK THE SOLENOID.
Turn the disconnect switch and the key start switch to the ON position. Do not start the engine.
Disconnect the solenoid with the active diagnostic code from the machine harness.
At the machine harness connector for the solenoid, place a jumper wire from contact 1 (wire K988-WH) to contact 2 (wire J805-YL).
Observe the status of the CID 0711 FMI 05.Expected Result:The diagnostic code is active. Then, the diagnostic code changes from FMI "05" to FMI "06" as the jumper wire is installed.Results:
YES - The diagnostic code remains active. The jumper wire does not affect the diagnostic code. Proceed to Test Step 2.
NO - The diagnostic is no longer active. The solenoid has failed.Repair: The solenoid has failed. Replace the solenoid. Verify that the new solenoid corrects the problem.STOPTest Step 2. CHECK THE HARNESS FOR AN OPEN.
Turn the key start switch and the disconnect switch to the OFF position.
Disconnect the machine harness connector(s) from the ECM.
The jumper wire that was installed in the previous Test Step remains in place.
At the machine harness connector, measure the resistance from signal contact J1-67 (wire K988-WH) to contact J1-54 (wire J805-YL).Expected Result:The resistance is less than 5.0 ohms.Results:
OK - The resistance is less than 5.0 ohms. The machine harness is correct. Proceed to Test Step 3.
NOT OK - The resistance is greater than 5000 ohms. The resistance measurement is not correct. There is an open circuit in the machine harness.Repair: Repair the machine harness or replace the machine harness.STOPTest Step 3. CHECK IF THE DIAGNOSTIC CODE REMAINS.
Inspect the harness connectors. Clean the contacts of the harness connectors and check the wires for damage to the insulation that is caused by excessive heat, battery acid, or chafing.
Perform a 45 N (10 lb) pull test on each of the wires that are associated with the circuit.
Reconnect all harness connectors in order to make sure that the connectors are fully seated. Also, make sure that the clips for each connector are completely fastened.
Turn the disconnect switch and the key start switch to the ON position.
Operate the machine.
Check the status of the CID 0711 FMI 05.Expected Result:The CID 0711 FMI 05 is active. Results:
YES - The CID 0711 FMI 05 is active. The diagnostic code has not been corrected.Repair: Check the circuit again. If the Caterpillar
Caterpillar parts catalog:
Parts aftercooler Caterpillar catalog:
2459209
AFTERCOOLER AS
324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325D, 325D FM, 325D FM LL, 325D L, 325D MH, 329D, 329D L, 329D LN, M325D L MH, M325D MH
324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325D, 325D FM, 325D FM LL, 325D L, 325D MH, 329D, 329D L, 329D LN, M325D L MH, M325D MH
1968085
AFTERCOOLER AS
385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B
385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B
7Y1191
AFTERCOOLER AS
375, 375 L, 5080
375, 375 L, 5080
3680804
AFTERCOOLER GP
CS-74B, CS-78B
CS-74B, CS-78B
3535553
AFTERCOOLER AS
324D, 324D FM, 324D L, 325D, 325D FM, 325D L, 326D L, 329D, 329D L
324D, 324D FM, 324D L, 325D, 325D FM, 325D L, 326D L, 329D, 329D L
2653626
AFTERCOOLER AS
320D, 323D L, 323D LN
320D, 323D L, 323D LN
2364456
AFTERCOOLER
322C, 325C, M325C MH
322C, 325C, M325C MH
2040998
AFTERCOOLER AS
320C, 321C
320C, 321C
2302820
AFTERCOOLER AS
322C, 325C
322C, 325C
2041044
AFTERCOOLER AS
322C, 325C
322C, 325C