AFTERCOOLER AS 2653626 - Caterpillar

2653626 AFTERCOOLER AS Caterpillar parts 320D, 323D L, 323D LN

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA2653626
265-3626
2653626

Weight: 17 pounds 7 kg.

Buy AFTERCOOLER AS 2653626 Caterpillar genuine, new aftermarket tractor parts with delivery
EXCAVATOR,

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below

IMIFAFTAbT 265-3626 2653626 CA2653626 After Cooler Fits for Caterpillar 323D 323DL 320D 320DL Excavator

$755.00

02 Oct 2025

CN: ziwangcjx

IMIFAFTAbT 265-3626 2653626 CA2653626 After Cooler Fits for Caterpillar 323D 323DL 320D 320DL Excavator
IMIFAFTAbT Product Name: 265-3626 2653626 CA2653626 After Cooler || Part number: 265-3626 2653626 CA2653626 || Fits for Caterpillar 323D 323DL 320D 320DL Excavator || 1 PCS After Cooler || Note: Please confirm that the product shown in the part number is what you need If you cannot confirm you can provide your engine serial number and nameplate

After Cooler 265-3626 2653626 CA2653626 Compatible for CAT 323D 323DL 320D 320DL Excavator

$752.00

02 Oct 2025

CN: QX construction

After Cooler 265-3626 2653626 CA2653626 Compatible for CAT 323D 323DL 320D 320DL Excavator
DJCXYSM Product Name:After Cooler || Product Number:265-3626 2653626 CA2653626 || Application:Compatible for CAT 323D 323DL 320D 320DL Excavator || NOTE: To avoid unnecessary returns please check the part number before purchasing or tell us the picture of your engine model and nameplate to reduce the error rate. || TIP: If you cannot find the required product part number, please consult us and we will reply as soon as possible.

Number on catalog scheme: 13

Caterpillar 2653626 Parts scheme AFTERCOOLER AS

For full view, you need register

Compatible equipment models: 2653626:

EXCAVATOR 320D 323D L 323D LN Caterpillar

Information:

Illustration 7 g00517156
Install O-ring seal (29) on plug (28) . Install the assembly.
Illustration 8 g00517155
Use Tooling (A) in order to install bearings (27) . Install the bearing joints 30° 15° away from the centerline and toward the pump discharge port. Install the bearings to a depth of 1.5 .25 mm (0.059 0.009 inch).
Check the diameter of bearings (27) . After installation, the diameters of each bearing must be 31.786 .008 mm (1.2514 0.0003 inch).
Install O-ring seal (26) .
Illustration 9 g00517153
Install gear and shaft (22) (not shown).
Position the cover assembly.
Install cover (23) . Install tag (25) and bolts (24) .
Illustration 10 g00517150
Use Tooling (A) in order to install bearings (20) . Install the bearing joints 30° 15° away from the centerline and toward the pump discharge port. Install the bearings to a depth of 1.5 .25 mm (0.059 0.009 inch).
Check the diameter of bearings (20) . After installation, the diameters of each bearing must be 31.786 .008 mm (1.2514 0.0003 inch).
Install O-ring seal (21) .
Illustration 11 g00517149
Illustration 12 g00517165
(Dimension G) 8.5 .5 mm (0.34 0.02 inch)
Install housing (19) .
Install dampers (15) to a depth of 8.5 .5 mm (0.34 0.02 inch).
Install dampers (14) to a depth of 1.5 .5 mm (0.06 0.02 inch).
Install key (17) .
Install gears (16) .
Install O-ring seal (18) .
Illustration 13 g00517147
Use Tooling (A) in order to install bearings (13) . Install the bearing joints 30° 15° away from the centerline and toward the pump discharge port. Install the bearings to a depth of 1.5 .25 mm (0.059 0.009 inch).
Check the diameter of bearings (13) . After installation, the diameters of each bearing must be 31.786 .008 mm (1.2514 0.0003 inch).
Use Tooling (A) in order to install dowels (12) . The dowels must extend by 5 .5 mm (0.19 0.02 inch) from the surface of the housing.
Illustration 14 g00517145
Use Tooling (A) in order to install dowels (11) . The dowels must extend 5 .5 mm (0.19 0.02 inch) from the surface of the housing.
Install mounting flange (10) . The weight of mounting flange (10) is approximately 21 kg (46 lb).
Illustration 15 g00517144
Install key (9) .
Install gears (8) .
Illustration 16 g00517143
Use Tooling (A) in order to install bearings (6) . Install the bearing joints 30° 15° away from the centerline and toward the pump discharge port. Install the bearings to a depth of 1.5 .25 mm (0.059 0.009 inch).
Check the diameters of the bearings. After installation, the diameters of each bearing must be 31.786 .008 mm (1.2514 0.0003 inch).
Install O-ring seal (7) .
Illustration 17 g00517142
Install cover (5) . Install bolts (2) .
Install bolts (1) .
Install O-ring seal (4) on plug (3) . Install the assembly.Note: After installation, the gear pump (torque converter and transmission) must rotate freely.End By: Install the gear pump (torque converter and transmission).