3128339 AFTERCOOLER AS Caterpillar parts
320D, 320D FM, 320D GC, 320D L, 323D L, 323D LN, 323D SA
Rating:
Alternative (cross code) number:
CA3128339
312-8339
3128339
CA3128339
312-8339
3128339
Weight: 25 pounds 11 kg.
EXCAVATOR, MOBILE HYD POWER UNIT,
Compatible equipment models: 3128339:
Number on catalog scheme:
4
For full view, you need register
Information:
Removal Procedure
Start By:
Remove the valve mechanism cover. Refer to Disassembly and Assembly, "Valve Mechanism Cover - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01345395
Typical example
Loosen the nuts and adjustment screws (1) on all rocker arms.
Remove bolts (5) .
Progressively loosen bolts (3). Begin at the ends of the rocker shaft assembly and work toward the center.Note: Damage to the rocker shaft may occur if the long bolts are loosened first. To avoid distortion of the rocker shaft assembly, each bolt should be loosened by a quarter of a turn at one time. Repeat the procedure until all bolts are loosened.
Remove bolts (3) .
Remove rocker shaft assembly (2) from the cylinder head.
Place temporary identification marks on pushrods (4) and pads (6) .Note: Identification will ensure that the pushrods and pads can be reinstalled in the correct position. Do not interchange the positions of used pushrods or pads.
Remove pushrods (4) from the cylinder head. Remove pads (6) from the valve stems.
Start By:
Remove the valve mechanism cover. Refer to Disassembly and Assembly, "Valve Mechanism Cover - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01345395
Typical example
Loosen the nuts and adjustment screws (1) on all rocker arms.
Remove bolts (5) .
Progressively loosen bolts (3). Begin at the ends of the rocker shaft assembly and work toward the center.Note: Damage to the rocker shaft may occur if the long bolts are loosened first. To avoid distortion of the rocker shaft assembly, each bolt should be loosened by a quarter of a turn at one time. Repeat the procedure until all bolts are loosened.
Remove bolts (3) .
Remove rocker shaft assembly (2) from the cylinder head.
Place temporary identification marks on pushrods (4) and pads (6) .Note: Identification will ensure that the pushrods and pads can be reinstalled in the correct position. Do not interchange the positions of used pushrods or pads.
Remove pushrods (4) from the cylinder head. Remove pads (6) from the valve stems.
Cat SIS web machinery list:
Parts aftercooler Caterpillar catalog:
320D, 320D FM, 320D GC, 320D L, 320D LN, 323D L, 323D LN, 323D SA
320D, 320D FM, 320D GC, 320D L, 320D LN, 323D L, 323D LN, 323D SA
345C, 345C L, 345C MH, W345C MH
2653644
AFTERCOOLER AS
320D LRR, 321C, 321D LCR
320D LRR, 321C, 321D LCR
3535553
AFTERCOOLER AS
324D, 324D FM, 324D L, 325D, 325D FM, 325D L, 326D L, 329D, 329D L
324D, 324D FM, 324D L, 325D, 325D FM, 325D L, 326D L, 329D, 329D L
320D, 323D L, 323D LN
2364456
AFTERCOOLER
322C, 325C, M325C MH
322C, 325C, M325C MH
3504582
AFTERCOOLER AS
321D LCR
321D LCR
3535556
AFTERCOOLER AS
320D LRR, 320D RR
320D LRR, 320D RR
2813536
AFTERCOOLER AS
320D FM RR, 320D LRR, 320D RR
320D FM RR, 320D LRR, 320D RR