AFTERCOOLER GP-WATER 4N8267 - Caterpillar

Removal Procedure
Accidental machine starting can cause injury or death to personnel working on the machine.To avoid accidental machine starting, turn the battery disconnect switch to the OFF position and remove the key. If the machine is not equipped with a battery disconnect switch, disconnect the battery cables from the battery and tape the battery clamps.Place a do not operate tag at the battery disconnect switch location to inform personnel that the machine is being worked on.
Turn the battery disconnect switch to the OFF position.
Illustration 1 g02476162
Remove panels (2) and remove panel (1) .Note: The steps can be removed prior to the removal of panel (1), or with panel (1) .
Illustration 2 g02476165
Remove harness assembly (3) .
Disconnect harness assemblies (4) and position out of the way.
Illustration 3 g02476169
Remove battery hold-down (5). Remove batteries (6). The batteries weigh approximately 27 kg (60 lb), each.Installation Procedure
Install batteries (6) in the reverse order of removal.
Tighten the nuts for harness assemblies (3) and (4) to a torque of 7.2 1.6 N m (64 14 lb in).