AFTERCOOLER GP-RAW WATER 5277181 - Caterpillar

1. Disconnect two hose assemblies (1). Cap or plug immediately. 2. Disconnect two hose assemblies (2). Cap or plug immediately. 3. Disconnect four electrical connections (3). 4. Remove four bolts (4) and washers.5. Lift up cover plate (5) to gain access to the hose assemblies. 6. Disconnect two hose assemblies (6). Cap or plug immediately. 7. Cut tie-wrap (7). 8. Bend tab down on bearing lockwasher (8).9. Remove bearing locknut (9), bearing lockwasher (8) and bearing locknut (10). 10. Remove bolt (11), nut and washer. 11. Remove bolt (12) and washer.12. Remove pin (13). 13. Attach a strap and a lift truck to extender (14) as shown. Pull the extender to the left approximately three feet. 14. Reattach the straps and a suitable lifting device to extender (14) as shown.15. Lift the extender slowly and carefully from the screed. The weight of the extender is 657 kg (1500 lb). For installation of the extender, reverse the removal steps.End By:a. install platform assemblyDisassemble & Assemble Extender 6641-017
Start By:a. remove extender 1. Disconnect hose assembly (1). Cap or plug immediately. 2. Remove bolt (2) and P-clamp. 3. Remove bolt (3), nut and washer.4. Disconnect two electrical connection (4) (not shown) to the burner group. 5. Attach straps and a suitable lifting device to frame assembly (5) as shown.6. Remove nineteen bolts (6) and washers (eleven bolts on the left end and eight bolts on the right end of the extender).7. Carefully lift frame assembly (5) straight up and away from the extender. The weight of the frame assembly is 261 kg (575 lb). 8. Frame and tube assembly (5) upon removal.