AFTERCOOLER GP-TREATED WATER 7C7032 - Caterpillar

Table 1
446B BACKHOE LOADER    
Approximate Weight    
8785 kg (19350 lb)    
Maximum Length    
7623 mm (25 ft)    
Width Across Tires    
2342 mm (7 ft 8 inches)    
Transport Height    
4157 mm (13 ft 7 inches)    Before loading, remove ice, snow, or other slippery material from the loading dock and from the truck bed. This should be done in order to prevent the machine from slipping. This should also be done in order to prevent a shift while the machine is moving in transit.
Obey all state and local laws governing the weight, width and length of a load.Make sure the cooling system has proper antifreeze if moving machine to a colder climate.Observe all regulations governing wide loads.
Illustration 1 g00040011
Chock the trailer or rail car wheels before you load the machine. (The trailer is shown.)
Put the machine in the transport position and load the machine.
Move the transmission control lever to NEUTRAL. Engage the transmission neutral lock.
Engage the parking brake.
Turn the engine start switch key to OFF in order to stop the engine. Remove the engine start switch key.
Move all of the hydraulic control levers in order to relieve any trapped pressure.
Lock the door and the access covers and attach any vandalism protection.
Secure the machine with tie-downs when you are transporting the machine on a rail car or on the tractor-trailer.
Cover the exhaust opening. The turbocharger (if equipped) should not rotate when the engine is not operating. Damage to the turbocharger can result.