AIR CONDITIO 0783783 - Caterpillar

Install O-ring seal (35) , spring (35) , and retainer (37) . Install O-ring seals (38) .
Illustration 37 g01401486
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Install cover (32) . Install bolts (33) . Tighten bolts (33) to a torque of 10 N m (88 lb in). Install check valve (34) . Tighten check valve (34) to a torque of 60 N m (44 lb ft).
Illustration 38 g01401468
Install spool (28) , retainer (29) , spring (30) , and O-ring seal (31) .
Illustration 39 g01401450
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Install cover (27) . Install bolts (26) . Tighten bolts (26) to a torque of 10 N m (88 lb in).
Illustration 40 g01401440
Install O-ring seals (25) into right hand stabilizer valve (2) .
Illustration 41 g01403300
Assemble inlet manifold (1) .
Illustration 42 g01401393
Install backup ring (22) , O-ring seal (23) and O-ring seal (24) onto cartridge (21) .
Illustration 43 g01401363
Install cartridge (21) . Install spool (20) . Apply Tooling (A) onto the threads of cartridge (21) . Tighten cartridge (21) to a torque of 45 6 N m (33 4 lb ft).
Illustration 44 g01401342
Install O-ring seal (17) . Install plug (16) . Install coil (19) . Install nut (18) . Tighten plug (16) to a torque of 20 N m (15 lb ft). Tighten nut (18) to a torque of 3.5 .5 N m (31 4 lb in).
Illustration 45 g02139374
Use an Allen wrench to install screen (15a) . Tighten screen (15a) to a torque of 6 0.6 N m (53.10 5.31 lb in). Install the plug for screen (15a) .
Illustration 46 g01401147
Install plugs (12) and (14) . Install O-ring seal (13) and (15) . Tighten plug (12) to a torque of 70 N m (51 lb ft).
Illustration 47 g01401145
Install nuts (11) onto bank valve (10) . Tighten nuts (11) to a torque of 35 3.5 N m (26 3 lb ft).End By: Install the bank valve (backhoe). Refer to Disassembly and Assembly, "Bank Valve (Backhoe) - Install".