AIR COMPRESSOR GP 0R9626 - Caterpillar

0R9626 AIR COMPRESSOR GP Caterpillar parts 3516B

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA0R9626
0R-9626
0R9626

Weight: 47 pounds 21 kg.

Buy AIR COMPRESSOR GP 0R9626 Caterpillar genuine, new aftermarket tractor parts with delivery
REMAN ENGINE,

Related part:

1609845 COMPRESSOR GP -B 0R9626 R

Compatible equipment models: 0R9626:

REMAN ENGINE 3516B Caterpillar

Number on catalog scheme: 1

Caterpillar 0R9626 Parts scheme AIR COMPRESSOR GP

For full view, you need register

Information:

Removal Procedure
Start By:
Install the body retaining pin. Refer to Disassembly and Assembly, "Pin (Body Retaining) - Remove and Install" for the Machine Systems.
Install the wheel chocks. Refer to Disassembly and Assembly, "Wheel Chock (Front and Rear) - Remove and Install" for the Machine Systems.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact skin.
Note: Install caps and plugs on all openings in order to prevent dirt or debris from entering the system. Cleanliness is an important factor. Before the removal procedure, the exterior of the component should be thoroughly cleaned. This will prevent dirt from entering the internal components.
Position a suitable container below the traction control valve in order to contain hydraulic oil for storage or for disposal.
Illustration 1 g00707601
Remove electrical connectors (1) and (2) from the clips. Disconnect the wire harnesses at electrical connectors (1) and (2).
Illustration 2 g00707602
Remove electrical connectors (3) and (5) from the clips. Disconnect the wire harnesses at electrical connectors (3) and (5). Remove two bolts (4) and (6) and the washers.
Illustration 3 g00707603
Disconnect five hose assemblies (7), (8), (9), (10) and (11).
Illustration 4 g00707605
Position a lifting sling around the traction control valve. Secure the lifting sling to a suitable hoist. Remove three bolts (12) and the washers. Remove the traction control valve from the machine. The weight of the traction control valve is 27 kg (60 lb).