AIR COMPRESSOR GP 1046046 - Caterpillar

Miscellaneous
"Monitoring Mode Shutdowns"
"Monitoring Mode Shutdowns" controls the shutdown feature that is associated with the engine monitoring feature. When this feature is enabled and an event code with a -3 suffix is detected, the engine will be shut down."Monitoring Mode Derates"
"Monitoring Mode Derates" controls the derate that is associated with the engine monitoring feature. When this feature is enabled and an event code with a -2 is detected, the engine will be derated."Limp Home Desired Engine Speed"
The "Limp Home Desired Engine Speed" is the maximum speed of the engine when the engine has been derated.
Table 15
Minimum Maximum Default
700 rpm 1800 rpm 1200 rpm "Configurable Inputs"
"Air Filter Restriction Switch Installation Status"
An "Air Filter Restriction Switch" is an optional switch input. Programming the "Air Filter Restriction Switch Installation Status" parameter to "Installed" notifies the ECM that an input from the air filter restriction switch is present. When this parameter is programmed to "Enabled" and the air filter restriction switch closes, an E172(1) or J107-15 event code will be displayed."Fuel/Water Separator Switch Installation Status"
A fuel/water separator switch is an optional switch input. Programming the "Fuel/Water Separator Switch Installation Status" parameter to "Installed" notifies the ECM that an input from a fuel/water separator switch is present. When this parameter is programmed to "Enabled" and the fuel/water separator switch closes, an E232(1) or J97-15 event code will be displayed."User Defined Switch Installation Status"
A user defined shutdown switch is an optional switch input. Programming the "User Defined Switch Installation Status" parameter to "Installed" notifies the ECM that a user defined switch input is present. If this parameter is programmed to "Enabled" and the user defined shutdown switch closes, the engine will shut down."Low System Battery Voltage Elevated Idle"
This parameter enables operation of the elevated idle function if a low battery condition is detected by the ECM."Ether Solenoid Configuration"
This parameter is enabled in order to define the installation status of an ether starting aid for the engine."Engine Cooling Fan Map"
This parameter identifies the current map that is used by the ECM to drive the engine cooling fan."Security System Installation Status"
This feature enables the ECM to provide the functionality for the installation of a "Machine Security System (MSS)". "Engine Warm-up Elevated Idle Feature Enable Status"
This feature enables an elevated idle in order to reduce the warm-up time of the engine."Parameter Table"
Table 16
System Configuration Parameters
Parameter Available Range or Options Default Required Password
ECM Identification Parameters
Engine Serial Number 0XX00000 or XXX00000 Blank Factory
Software Group Release Date Software Dependent Read Only
System Parameters
FLS Programmed at the Factory Factory
FTS Programmed at the Factory Factory
Rating Interlock Code Software Dependent Factory
Throttle Lock Feature Installation Status Installed
or
Not Installed Not Installed None
Monitoring Mode Shutdowns Enabled
Disabled Disabled None
Monitoring Mode Derates Enabled
Disabled Enabled None
Air Filter Restriction Switch Installation Status Installed
or
Not Installed Not Installed None
Fuel/Water Separator Switch Installation Status Installed
or
Not Installed Not Installed None
User Defined Switch Installation Status Installed
or
Not Installed Not Installed None
Low System Battery Voltage Elevated Idle Enabled
Disabled Enabled None
Ether Solenoid Configuration Not Installed
Continuous Flow Solenoid Continuous Flow Solenoid Customer
Engine Fan Reversing Feature Enabled
Disabled Enabled None
Engine Cooling Fan Map