AIR CLEANER GP 1241708 - Caterpillar

Disconnect hose (10).
Illustration 6 g03438638
Illustration 7 g03438580
Attach a suitable lifting device to hand rail (11). The combined weight of hand rail (11) and platform (13) is approximately 34 kg (75 lb).
Remove bolts (12), bolts (14), and bolts (15). Use the suitable lifting device in order to remove platform (13).
Illustration 8 g03438662
Disconnect hoses (16).
Illustration 9 g03438708
Remove pin (19). Loosen nut (17) and place cable assembly (18) out of the way.
Illustration 10 g03438737
Remove cab shroud (20).
Illustration 11 g03438818
Remove the bolts in order to disconnect bracket (21) from the front of cab (6).
Illustration 12 g03438821
Disconnect all hose assemblies (23) that are connected to brake control valve (22).
Illustration 13 g03438839
Remove the nuts, the washers, and bolts (25) in order to disconnect steering shaft (24). Set steering shaft (24) to the side.
Illustration 14 g03442878
Rear left side of cab.
Disconnect ground strap (26) that is located under the cab.
Illustration 15 g03443318
Remove hose (27).
Illustration 16 g03443636
Remove the bolts and attach Tooling (A), along with a suitable lifting device, to cab (6). The weight of cab (6) is approximately 1406 kg (3100 lb).
Illustration 17 g03444177
Front mounting bolts
Illustration 18 g03444178
Rear mounting bolts
Remove mounting bolts (28) and mounting bolts (29).
Illustration 19 g03443636
Use Tooling (A) and the suitable lifting device in order to remove cab (6). Installation Procedure
Install cab (6) in the reverse order of removal.
Tighten mounting bolts (28) and mounting bolts (29) to a torque of 850 100 N m (627 74 lb ft).