1273485 AIR CLEANER AS Caterpillar parts
924H
Rating:
Alternative (cross code) number:
CA1273485
127-3485
1273485
CA1273485
127-3485
1273485
Weight: 4 pounds 1 kg.
WHEEL LOADER,
Compatible equipment models: 1273485:
Number on catalog scheme:
1
For full view, you need register
Information:
2. Disconnect lubrication line (3).3. Disconnect small water line (4).4. Remove four bolts (1) to water bypass elbow (5).5. Remove two bolts mounting water pump outlet elbow (2).6. Remove water pump-to-engine retaining bolts and remove water pump-weight 75 lbs. (34 kg).Install Water Pump
1. Position the water pump to engine and install retaining bolts.2. Install water pump outlet elbow.3. Connect lubrication line.4. Connect small water line.5. Install bolts on water bypass elbow.6. Fill cooling system to specified level.concluding step: a) install alternatorDisassemble Water Pump
preparatory step: a) remove water pump
TYPICAL EXAMPLE1. Remove the pulley retaining nut and lock. Install puller assembly (A) and remove the pulley. Remove the key.2. Remove the retainer and seal. Remove seal from retainer.
TYPICAL EXAMPLE3. Remove the cover retaining bolts and nuts. Remove the cover from the water pump housing.4. Remove the impeller retaining nut. Remove the impeller by holding the shaft and rotating the impeller clockwise.5. Remove the shaft assembly from the housing. Remove the bearing assemblies and spacer from the shaft.6. Remove the carbon seal assembly and lip-type seal from the housing.Assemble Water Pump
TYPICAL EXAMPLE1. Using seal installer (A), install the carbon seal assembly into water pump housing. Install the lip-type seal in housing with lip of seal toward bearing assemblies. Lubricate the lip of seal with lubricant being sealed.2. Install the bearing assemblies and spacer on the shaft. Install the shaft assembly in housing.
TYPICAL EXAMPLE3. Install the seal in the cage with lip of seal toward bearing assemblies. Lubricate the lip of seal. Install the cage on housing.4. Install the pulley, lock and retaining nut. Tighten nut (2) to 50-55 lb. ft. (6,9-7,6 mkg) and bend the lock.5. Install the impeller on shaft. Adjust impeller clearance (3) to .010 .005 in. (0,25 0,13 mm). Install the impeller retaining nut (1) and tighten to 50-55 lb. ft. (6,9-7,6 mkg). After tightening nut, strike the pulley end of shaft and check impeller clearance while rotating impeller.6. Install the water pump cover, retaining bolts and nuts.concluding step: a) install water pump
1. Position the water pump to engine and install retaining bolts.2. Install water pump outlet elbow.3. Connect lubrication line.4. Connect small water line.5. Install bolts on water bypass elbow.6. Fill cooling system to specified level.concluding step: a) install alternatorDisassemble Water Pump
preparatory step: a) remove water pump
TYPICAL EXAMPLE1. Remove the pulley retaining nut and lock. Install puller assembly (A) and remove the pulley. Remove the key.2. Remove the retainer and seal. Remove seal from retainer.
TYPICAL EXAMPLE3. Remove the cover retaining bolts and nuts. Remove the cover from the water pump housing.4. Remove the impeller retaining nut. Remove the impeller by holding the shaft and rotating the impeller clockwise.5. Remove the shaft assembly from the housing. Remove the bearing assemblies and spacer from the shaft.6. Remove the carbon seal assembly and lip-type seal from the housing.Assemble Water Pump
TYPICAL EXAMPLE1. Using seal installer (A), install the carbon seal assembly into water pump housing. Install the lip-type seal in housing with lip of seal toward bearing assemblies. Lubricate the lip of seal with lubricant being sealed.2. Install the bearing assemblies and spacer on the shaft. Install the shaft assembly in housing.
TYPICAL EXAMPLE3. Install the seal in the cage with lip of seal toward bearing assemblies. Lubricate the lip of seal. Install the cage on housing.4. Install the pulley, lock and retaining nut. Tighten nut (2) to 50-55 lb. ft. (6,9-7,6 mkg) and bend the lock.5. Install the impeller on shaft. Adjust impeller clearance (3) to .010 .005 in. (0,25 0,13 mm). Install the impeller retaining nut (1) and tighten to 50-55 lb. ft. (6,9-7,6 mkg). After tightening nut, strike the pulley end of shaft and check impeller clearance while rotating impeller.6. Install the water pump cover, retaining bolts and nuts.concluding step: a) install water pump
Caterpillar parts catalog:
Parts air Caterpillar catalog:
1934304
AIR CONDITIONER GP
938G II
938G II
9M6370
AIR CLEANER
977H
977H
977H
977H
120G, 130G, 140G, 160G, 518, 518C, 528B, 530B, 936, 936F, 950B, 950B/950E, G936
8C3985
AIR COMPRESSOR
926, 926A, G916, G926, IT18B, IT28B
926, 926A, G916, G926, IT18B, IT28B
7N4048
AIR CLEANER GP
637E, 768C, 769C, 772B, 773B, 992C, 992D
637E, 768C, 769C, 772B, 773B, 992C, 992D
657E, 768C, 769C, 772B, 773B, 992C, 992D, RR-250, SM-350, SS-250
6G9970
AIR DRYER GP
651E, 657E
651E, 657E
627B, 980B