AIR CLEANER GP 1329326 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     138-7573     Link Bracket     3    
B     1U-9200     Lever Puller Hoist     1    Start By:
Remove the heat exchanger.
Remove the expansion tank.
Remove the aftercooler.
Remove the electronic unit injectors.
Remove the valve mechanism cover base.
Remove the exhaust manifold.
Illustration 1 g01194576
Remove bolts (2) and washers (3) .
Remove cover (1) and the O-ring seal.
Illustration 2 g01194581
Remove bolts (4) . Remove gear (5) .
Illustration 3 g01194585
Remove bolts (6) , thrust plate (7) , and adapter assembly (8) .
Illustration 4 g01194626
Use bolt (6) in order to remove sealing plate (9) . Remove the O-ring seals.
Illustration 5 g01194645
Remove tube assemblies (10) and (14) . Disconnect hose assembly (13) .
Remove cover (11) .
Disconnect harness assembly (12) .
Illustration 6 g01194679
Remove bolts (15) and damper (16) .
Illustration 7 g01194687
Remove bolts (17) . Remove sealing plate (18) and adapter assembly (19) .
Illustration 8 g01194872
Remove supports (21) .
Attach Tooling (A) and a suitable lifting device to cylinder head (22) . Attach Tooling (B) to the side of cylinder head (22) that is near the turbocharger. The weight of cylinder head (22) is approximately 330 kg (726 lb).
Remove bolts (20) and (23) .
Remove cylinder head (22) . Remove the gaskets, O-ring seals, and the spacer plate.