AIR CLEANER GP 1457150 - Caterpillar

1457150 AIR CLEANER GP Caterpillar parts 446B, 446D

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA1457150
145-7150
1457150

Weight: 16 pounds 7 kg.

Information:

BODY DIAMETER 241.3 mm

INLET DIAMETER 76.2 mm

OUTLET DIAMETER 76.2 mm

OVERALL LENGTH 299.7 mm

PRIMARY ELEMENT PART NUMBER 1080671

SECONDARY ELEMENT PART NUMBER 1080672

TUBULAR OUTLET Y

Buy AIR CLEANER GP 1457150 Caterpillar genuine, new aftermarket tractor parts with delivery
BACKHOE LOADER,

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below

Buyers Products 1457150 Chain, Conveyor, Replaces Swenson #EV100

$889.99

07 Apr 2021
209.0[94.05] Pounds
-: -

Buyers Products 1457150 Chain, Conveyor, Replaces Swenson #EV100
Swenson 04045-037-00

Number on catalog scheme: 1

Caterpillar 1457150 Parts scheme AIR CLEANER GP

For full view, you need register

Compatible equipment models: 1457150:

BACKHOE LOADER 446B 446D Caterpillar

Information:

Removal Procedure
Start By:
Remove the engine enclosure. Refer to Disassembly and Assembly, "Engine Enclosure - Remove and Install".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide", for tools and supplies suitable to collect and contain fluids in Caterpillar machines.Dispose of all fluids according to local regulations and mandates.
At operating temperature, the engine coolant is hot and under pressure.Steam can cause personal injury.Check the coolant level only after the engine has been stopped and the filler cap is cool enough to touch with the bare hand.Remove the filler cap slowly to relieve pressure.Cooling system conditioner contains alkali. Avoid contact with skin and eyes to prevent personal injury.
Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
Drain the engine coolant from the radiator below the level of the turbocharger.
Illustration 1 g00582876
Remove mounting bolts (1) and remove shield assembly (2) from the turbocharger.
Illustration 2 g00582877
Remove tube assembly (3) and tube assembly (4) from the turbocharger.
Remove bolts (5) and remove manifold assembly (6) from the turbocharger.
Illustration 3 g00582878
Remove remaining flange bolts (7) and remove adapter (8). Remove elbow assembly (9) .
Illustration 4 g00582879
Remove mounting bolts (10) .
Remove bolts (11) from two elbow assemblies (12) .
Illustration 5 g00582880
Remove support assembly (13) .
Remove bolts (15) from elbow (14) .
Remove mounting bolts (16) and remove the turbocharger. The weight of the turbocharger is 27 kg (60 lb).