AIR CONDITIONER AR 1834518 - Caterpillar

1. Remove retainers (3) from each end of outer guard assembly (1).2. Remove five nuts (2) and push the rod assemblies out of outer guard assembly (1).
Typical Example3. Put wooden block (5) between the track assembly and outer guard assembly (1) at each end.
Typical Example4. Use bolts (4) that hold the outer guard assembly to lower it on the blocks. Use two persons and remove outer guard assembly (1). The weight is 36 kg (80 lb.).
Typical Example5. Remove rod assemblies (6) from inner guard assembly (7).6. Put wooden blocks (5) between the track assembly and inner guard assembly (7) at each end.7. Remove retainer (9).8. Use bolts (8) that hold the inner guard assembly to lower it on the blocks. Use two persons and remove guard assembly (7). The weight is 36 kg (80 lb.).Install Track Roller Guards
Typical Example1. Put inner guard assembly (1) in position on wooden blocks and install the bolts and spacers that hold the inner guard assembly to the track roller frame. Tighten the bolts to a torque of 680 70 N m (500 50 lb.ft.).
Typical Example2. Install the retainer that holds the front of the inner guard assembly in place.3. Install tubes (2) and rod assemblies (3) in the inner guard assembly as shown.
Typical Example4. Put outer guard assembly (5) in position. Install spacers and bolts (4). Tighten bolts (4) to a torque of 680 70 N m (500 50 lb.ft.). 5. Install retainers (7).6. Install lockwashers and nuts (6) on the rod assemblies. Tighten the nuts to a torque of 360 45 N m (265 35 lb.ft.).