AIR CLEANER AS 2080570 - Caterpillar

Illustration 30 g02342656
(1) CA3 (2) Cable Assembly
Open ET by selecting "Start Menu" >> "All Programs">> ET >> "Electronic Technician".Note: When opening ET with CA3 for the first time, the connection of CA3 can happen based on old settings.If this action occurs, click "Stop Connect".
Illustration 31 g02147394
Go to "Utilities" >> "Preferences", and then select the "Communications" tab.
Illustration 32 g02147397
Select the appropriate communication adapter.
Select "Comm Adapter 3 (RP1210)" from the list of available adapters.
Select a preference (check the box) for "Enable Dual Data Link Service".Click "OK" to save these settings.
Illustration 33 g02147468
To connect the PC to the data link through the CA3, click the "Connect" icon button.
Illustration 34 g02147470
(1B) CA3 Power Lamp
When the CA3 is first connected, power lamp (1B) is YELLOW. In approximately one second, the light turns RED.
Illustration 35 g02342716
(1B) CA3 Power LampNote: While the CA3 is connected, the light for each data link will illuminate "(J1939 - RED, CDL - YELLOW, and J1708 - GREEN)".Service Parts Section
Communications Adapter 3 (CA3) Group
Table 3
Communications Adapter 3 (CA3) Group    
Item     Description     QTY    
1     Communications Adapter 3 (CA3)     1    
2     CA3/data link Cable Assembly     1    
3     CA3/PC Cable Assembly     1    
4     Case     1    
4a     Foam Inserts     1    
-     Media CD     1    
-     Tool Operating Manual     1    
Illustration 36 g02341517
Illustration 37 g02146554
Illustration 38 g02146594
Illustration 39 g02146595
Note: At the end of the tools operational life, dispose of the components. Recycle electrical equipment according to all Federal, state, and local guidelines.
Table 4
Notes