2081092 AIR CLEANER GP Caterpillar parts
305
Rating:
Alternative (cross code) number:
CA2081092
208-1092
2081092
CA2081092
208-1092
2081092
MINI HYD EXCAVATOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Alternator 208-1092 Automobile Replacement Alternators
DFGUFG [Product Compatibility]: The OE number for this product is 208-1092 || [Multi-Purpose Application]: When your car's engine stalls, the dashboard warning light is on, or there is a problem with the electrical system, this alternator is the best choice to solve the problem, providing power to the car and charging the battery || [Quiet Operation]: Using advanced noise reduction technology, it maintains low noise levels while providing stable output, enhancing the driving experience || [Weather-Resistant Structure]: With performance comparable to that of the original OE alternator, it can withstand various elements and provide reliable performance in various weather conditions || [Efficient Compatibility]: Designed to fit, ensuring a perfect match every time. Compatible with most OEM car brands and models, it is easy to replace or upgrade the cooling system. Please check the OE number or enter your vehicle brand, model and year using the garage tool to confirm compatibility
DFGUFG [Product Compatibility]: The OE number for this product is 208-1092 || [Multi-Purpose Application]: When your car's engine stalls, the dashboard warning light is on, or there is a problem with the electrical system, this alternator is the best choice to solve the problem, providing power to the car and charging the battery || [Quiet Operation]: Using advanced noise reduction technology, it maintains low noise levels while providing stable output, enhancing the driving experience || [Weather-Resistant Structure]: With performance comparable to that of the original OE alternator, it can withstand various elements and provide reliable performance in various weather conditions || [Efficient Compatibility]: Designed to fit, ensuring a perfect match every time. Compatible with most OEM car brands and models, it is easy to replace or upgrade the cooling system. Please check the OE number or enter your vehicle brand, model and year using the garage tool to confirm compatibility
$21.99
23 Jul 2021
CN: KFBE
KFBE Round Tablecloth Cute Dog Table Cloth for Circular Table Cover Heat-Resistant Washable Polyester for Dining Wedding Party Christmas 2081092
KFBE Round Tablecloth 60 inch Size:60inch/152.4CM diameter with white lace 1.57inch/4CM || Eco-Friendly&Non-Toxic Materials:Made of soft polyester,Machine Washable and reusable. || Features: Environmental health material, comfortable feel, natural skin-friendly, anti-wrinkle and wear-resistant, unwiredrawn, high heat does not deform, with good water and oil repellent performance. || Multi Purpose Utilization:our tablecloth is perfect for wedding, birthday party, bridal or baby shower, candy buffet, Christmas,Halloween,exhibition event and other various parties. || Excellent Service: We offers excellent customer service.If you have any problem with our products,please feel free to let us know and we will solve it for you within 24 hours.
KFBE Round Tablecloth 60 inch Size:60inch/152.4CM diameter with white lace 1.57inch/4CM || Eco-Friendly&Non-Toxic Materials:Made of soft polyester,Machine Washable and reusable. || Features: Environmental health material, comfortable feel, natural skin-friendly, anti-wrinkle and wear-resistant, unwiredrawn, high heat does not deform, with good water and oil repellent performance. || Multi Purpose Utilization:our tablecloth is perfect for wedding, birthday party, bridal or baby shower, candy buffet, Christmas,Halloween,exhibition event and other various parties. || Excellent Service: We offers excellent customer service.If you have any problem with our products,please feel free to let us know and we will solve it for you within 24 hours.
Number on catalog scheme:
For full view, you need register
Compatible equipment models: 2081092:
Information:
Relieving Track Tension
Hydraulic Adjusting Type
Remove any dirt or debris that could prevent retraction of the idler. Clean the track adjuster vent holes thoroughly.
Before attempting to separate the track or remove any part of the track adjusting mechanism, be certain the hydraulic pressure in the track adjusting cylinder is completely relieved and the cylinder (4) can be moved to the rear into the recoil spring front pilot (5).
HYDRAULIC TRACK ADJUSTER
1. Relief valve. 2. Fill valve. 3. Vent holes. 4. Cylinder. 5. Recoil spring front pilot.Relieve the pressure in the hydraulic track adjuster cylinder, WITH CAUTION as given in the following steps:
Because of the hydraulic pressure in the track adjuster cylinder, never visually inspect the vent holes (3) or valves to see if lubricant is escaping. Always watch the cylinder (4) to see if it moves to the rear into the recoil spring front pilot (5).
1. Loosen the RELIEF valve (1) one turn. Lubricant should escape from the vent holes just below the RELIEF valve. Wait momentarily. If the cylinder (4) does not retract, loosen the FILL valve (2) one turn.2. If the cylinder has not retracted, loosen the RELIEF valve until it contacts the underside of the guard. If the cylinder does not retract, loosen the FILL valve until it contacts the underside of the guard.3. If track tension is still evident, start the machine and move it backward and forward.4. If moving the machine has not relieved all the tension, put a drawbar pin between the sprocket and track. Back the machine slightly putting additional tension on the track to force the lubricant out of the vent holes.Screw Adjusting Type
SCREW TYPE TRACK ADJUSTER
1. Clamp bolts. 2. Screw assembly. 3. Adjusting nut.To loosen the track, loosen clamp bolts (1). Turn screw assembly (2) into the recoil spring adjusting nut (3).Filling And Bleeding The Hydraulic Track Adjuster
Use the following procedure to bleed the air on the initial filling of the hydraulic track adjuster cylinder.
HYDRAULIC TRACK ADJUSTER
1. Fill valve. 2. Relief valve. 3. Relief valve vent holes.1. Loosen the relief valve (2) one turn. Force SAE 30 lubricating oil through the fill valve.2. When the oil flowing out the relief valve vent hole (3) no longer contains air bubbles, close the relief valve. Continue filling the cylinder with oil until the track adjustment is correct. See the correct POWER TRAIN SPECIFICATIONS book for the correct track adjustment.3. Move the machine backward and forward to equalize the adjustment. Recheck the adjustment.4. Make subsequent track adjustments as outlined in the Lubrication and Maintenance Guide section of the Service Manual.Sprocket Segment Removal And Installation
SEGMENT REMOVAL
1. Solid pin. 2. Sprocket segment.1. Remove sprocket guards.2. All tension must be removed from the track. See subject RELIEVING TRACK TENSION.3. Place a solid pin (1) between two front teeth of sprocket segment.4. Move the vehicle backward to lift the track from the sprocket.5. Remove nuts, bolts and sprocket segment (2).6. Install sprocket segment with word "OUT" to outside. Put lubricant on bolt and nut threads and tighten all
Hydraulic Adjusting Type
Remove any dirt or debris that could prevent retraction of the idler. Clean the track adjuster vent holes thoroughly.
Before attempting to separate the track or remove any part of the track adjusting mechanism, be certain the hydraulic pressure in the track adjusting cylinder is completely relieved and the cylinder (4) can be moved to the rear into the recoil spring front pilot (5).
HYDRAULIC TRACK ADJUSTER
1. Relief valve. 2. Fill valve. 3. Vent holes. 4. Cylinder. 5. Recoil spring front pilot.Relieve the pressure in the hydraulic track adjuster cylinder, WITH CAUTION as given in the following steps:
Because of the hydraulic pressure in the track adjuster cylinder, never visually inspect the vent holes (3) or valves to see if lubricant is escaping. Always watch the cylinder (4) to see if it moves to the rear into the recoil spring front pilot (5).
1. Loosen the RELIEF valve (1) one turn. Lubricant should escape from the vent holes just below the RELIEF valve. Wait momentarily. If the cylinder (4) does not retract, loosen the FILL valve (2) one turn.2. If the cylinder has not retracted, loosen the RELIEF valve until it contacts the underside of the guard. If the cylinder does not retract, loosen the FILL valve until it contacts the underside of the guard.3. If track tension is still evident, start the machine and move it backward and forward.4. If moving the machine has not relieved all the tension, put a drawbar pin between the sprocket and track. Back the machine slightly putting additional tension on the track to force the lubricant out of the vent holes.Screw Adjusting Type
SCREW TYPE TRACK ADJUSTER
1. Clamp bolts. 2. Screw assembly. 3. Adjusting nut.To loosen the track, loosen clamp bolts (1). Turn screw assembly (2) into the recoil spring adjusting nut (3).Filling And Bleeding The Hydraulic Track Adjuster
Use the following procedure to bleed the air on the initial filling of the hydraulic track adjuster cylinder.
HYDRAULIC TRACK ADJUSTER
1. Fill valve. 2. Relief valve. 3. Relief valve vent holes.1. Loosen the relief valve (2) one turn. Force SAE 30 lubricating oil through the fill valve.2. When the oil flowing out the relief valve vent hole (3) no longer contains air bubbles, close the relief valve. Continue filling the cylinder with oil until the track adjustment is correct. See the correct POWER TRAIN SPECIFICATIONS book for the correct track adjustment.3. Move the machine backward and forward to equalize the adjustment. Recheck the adjustment.4. Make subsequent track adjustments as outlined in the Lubrication and Maintenance Guide section of the Service Manual.Sprocket Segment Removal And Installation
SEGMENT REMOVAL
1. Solid pin. 2. Sprocket segment.1. Remove sprocket guards.2. All tension must be removed from the track. See subject RELIEVING TRACK TENSION.3. Place a solid pin (1) between two front teeth of sprocket segment.4. Move the vehicle backward to lift the track from the sprocket.5. Remove nuts, bolts and sprocket segment (2).6. Install sprocket segment with word "OUT" to outside. Put lubricant on bolt and nut threads and tighten all
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts air Caterpillar catalog:
1919470
AIR CONDITIONER GP
304, 305, 305.5, 306, 306E
304, 305, 305.5, 306, 306E
1992923
AIR CLEANER GP
304, 305
304, 305
3722154
AIR COMPRESSOR GP-SEAT
D3G, D3K XL, D3K2 LGP, D4G, D4K XL, D4K2 XL, D5G, D5K LGP, D5K2 XL
D3G, D3K XL, D3K2 LGP, D4G, D4K XL, D4K2 XL, D5G, D5K LGP, D5K2 XL
4W5160
AIR CLEANER GP
784B, 785, 785B, 785C, AD45B, AD55
784B, 785, 785B, 785C, AD45B, AD55
2115871
AIR CONDITIONER GP
906, 908
906, 908
768B, 769
5130, D9L, PM-565
8W7591
AIR CONDITIONER AR
120H, 120H ES, 120H NA, 135H, 135H NA
120H, 120H ES, 120H NA, 135H, 135H NA
1516690
AIR CLEANER GP
365B, 365B II, 365B L, 365C, 365C L, 365C L MH
365B, 365B II, 365B L, 365C, 365C L, 365C L MH
9K3089
AIR CONDITIONER GP
920, 930
920, 930
1536988
AIR CLEANER GP
CS-423E
CS-423E
7L8250
AIR STARTING MOTOR GROUP
D320A, D330A, D330B, D333A, D333B
D320A, D330A, D330B, D333A, D333B
6DE7066
AIR CONDITIONER AR
AD40, AE40
AD40, AE40