AIR CLEANER GP 3496260 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 207-1601 Rubber Lubricant 1 Start By:
Remove the exhaust elbow.
Drain the coolant.
Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change" for the correct draining and filling procedures.
Illustration 1 g03746886
Loosen clamp (1).
Loosen clamps (4) and remove bellows (3). Discard clamps (4) and bellows (3).
Remove elbow (2), elbow (5), and elbow (7).
Remove bolts (6).
Illustration 2 g03746917
Remove studs (8) and nut (9).
Remove exhaust gas cooler (10). Installation Procedure
Install exhaust gas cooler (10) in the reverse order of removal.
Apply Tooling (A) to the bores of elbow assembly (5) and elbow assembly (7), and the O-ring seals.
Install bellows (3) with the flow arrow pointing towards the exhaust cooler. Total misalignment of the bellows is 1.50 mm (0.060 inch) lateral and 1.50 mm (0.060 inch) axial.
Tighten clamps (1) and (4) to a torque of 7.5 1 N m (66 9 lb in).