3564873 AIR CLEANER GP Caterpillar parts
CX31-C13I
Rating:
Alternative (cross code) number:
CA3564873
356-4873
3564873
CA3564873
356-4873
3564873
PETROLEUM PACKAGE,
Compatible equipment models: 3564873:
Information:
Required Parts
Table 1
Required Part List    
Item     Qty     Part Number     Description    
3     1     315-0056     Cover As (1)    
4     52     9X-2125     Locking Bolt    
5     62     7X-7729     Washers    
6     1     310-2654     Cover (1)    
7     10     8T-0722     Locking Bolt    
8     1     316-2555     Cover As (1)    
9     1     290-3491     Cover As (1)    
10     1     315-6626     Cover As (1)    
( 1 ) Replace, if failedRework Procedure to Update 250-0159 Control Valve Cover Gp
Use the following procedure in order to update the control valve cover group:
Personal injury or death can result from sudden machine movement.Sudden movement of the machine can cause injury to persons on or near the machine.To prevent injury or death, make sure that the area around the machine is clear of personnel and obstructions before operating the machine.
Personal injury or death can result from machine movement.Place blocks in front of and behind the wheels to make sure that the machine does not move while the machine is in gear.
Accidental engine starting can cause injury or death to personnel working on the equipment.To avoid accidental engine starting, disconnect the battery cable from the negative (−) battery terminal. Completely tape all metal surfaces of the disconnected battery cable end in order to prevent contact with other metal surfaces which could activate the engine electrical system.Place a Do Not Operate tag at the Start/Stop switch location to inform personnel that the equipment is being worked on.
Illustration 1 g02625737
Remove 62 bolts (1) and 62 washers (2) and discard the parts.
Illustration 2 g02625779
Install cover assembly (3), cover (6), cover assembly (8), cover assembly (9) and cover assembly (10) as shown in Illustration 2.Note: Replace the cover and cover assembly only if the cover and cover assembly have failed.
Install 52 bolts (4) and 10 bolts (7) with washers (5) to the locations shown in Illustration 2. Tighten the bolts to 55 10 N m (41 7 lb ft).
Table 1
Required Part List    
Item     Qty     Part Number     Description    
3     1     315-0056     Cover As (1)    
4     52     9X-2125     Locking Bolt    
5     62     7X-7729     Washers    
6     1     310-2654     Cover (1)    
7     10     8T-0722     Locking Bolt    
8     1     316-2555     Cover As (1)    
9     1     290-3491     Cover As (1)    
10     1     315-6626     Cover As (1)    
( 1 ) Replace, if failedRework Procedure to Update 250-0159 Control Valve Cover Gp
Use the following procedure in order to update the control valve cover group:
Personal injury or death can result from sudden machine movement.Sudden movement of the machine can cause injury to persons on or near the machine.To prevent injury or death, make sure that the area around the machine is clear of personnel and obstructions before operating the machine.
Personal injury or death can result from machine movement.Place blocks in front of and behind the wheels to make sure that the machine does not move while the machine is in gear.
Accidental engine starting can cause injury or death to personnel working on the equipment.To avoid accidental engine starting, disconnect the battery cable from the negative (−) battery terminal. Completely tape all metal surfaces of the disconnected battery cable end in order to prevent contact with other metal surfaces which could activate the engine electrical system.Place a Do Not Operate tag at the Start/Stop switch location to inform personnel that the equipment is being worked on.
Illustration 1 g02625737
Remove 62 bolts (1) and 62 washers (2) and discard the parts.
Illustration 2 g02625779
Install cover assembly (3), cover (6), cover assembly (8), cover assembly (9) and cover assembly (10) as shown in Illustration 2.Note: Replace the cover and cover assembly only if the cover and cover assembly have failed.
Install 52 bolts (4) and 10 bolts (7) with washers (5) to the locations shown in Illustration 2. Tighten the bolts to 55 10 N m (41 7 lb ft).
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts air Caterpillar catalog:
1630820
AIR CLEANER GP
3126B, 3406E, 3408, 3408C, 3408E, 3412, 3412C, 3412E, 3456, C-15, C-16, C11, C13, C15, C18, CX31-C13I, CX31-C15I, CX35-P800, TH35-C11I, TH35-C13I, TH35-C15I, TH35-E81
3126B, 3406E, 3408, 3408C, 3408E, 3412, 3412C, 3412E, 3456, C-15, C-16, C11, C13, C15, C18, CX31-C13I, CX31-C15I, CX35-P800, TH35-C11I, TH35-C13I, TH35-C15I, TH35-E81
3496261
AIR CLEANER GP
777G, 824K, 825K, 826K, 834K, 836K, 844K, 854K, 988K, 990K, 992K, 993K, C13, C15, C18, CX31-C13I, CX31-C18I, CX35-C18I
777G, 824K, 825K, 826K, 834K, 836K, 844K, 854K, 988K, 990K, 992K, 993K, C13, C15, C18, CX31-C13I, CX31-C18I, CX35-C18I
3496260
AIR CLEANER GP
773G, 773G LRC, 773G OEM, 775G, 775G LRC, 775G OEM, 980K, 980K HLG, C13, C15, C9.3, CX31-C13I, D8T
773G, 773G LRC, 773G OEM, 775G, 775G LRC, 775G OEM, 980K, 980K HLG, C13, C15, C9.3, CX31-C13I, D8T
3433843
AIR CLEANER & MOUNTING GP
980K, 980K HLG, C13, C15, C9.3, CX31-C13I
980K, 980K HLG, C13, C15, C9.3, CX31-C13I
3042694
AIR COMPRESSOR GP
C11, C13, CX31-C13I, TH35-C11I, TH35-C13I, TH35-C13T
C11, C13, CX31-C13I, TH35-C11I, TH35-C13I, TH35-C13T
3517089
AIR COMPRESSOR GP
CX31-C13I
CX31-C13I
2784486
AIR CLEANER GP
C11, C13, C15, CX31-C13I, CX31-C15I, TH35-C11I, TH35-C13I, TH35-C15I, TH35-E81
C11, C13, C15, CX31-C13I, CX31-C15I, TH35-C11I, TH35-C13I, TH35-C15I, TH35-E81
3221998
AIR COMPRESSOR GP
C13, CX31-C13I
C13, CX31-C13I
3517090
AIR COMPRESSOR GP
C13, CX31-C13I
C13, CX31-C13I
3521915
AIR CLEANER GP
CX31-C13I
CX31-C13I
3475848
AIR CONDITIONER AR
777C, 777D
777C, 777D
3475854
AIR COMPRESSOR GP
777C, 777D
777C, 777D
4401618
AIR COMPRESSOR GP
C15, C18
C15, C18
3653612
AIR CLEANER GP
CX35-P800
CX35-P800
3449659
AIR CLEANER GP
CX31-C15I, CX35-P800
CX31-C15I, CX35-P800