AIR CLEANER GP 3716828 - Caterpillar

Illustration 1 g00759342
(1) Torque for breather ... 60 6 N m (44 4 lb ft)Torque for gauge ... 60 6 N m (44 4 lb ft) (2) After installing the three spring pins, make two stake marks at 2.25 mm (0.089 inch)from each pin. Refer to the view of area "A"in the illustration. (3) Torque for valve ... 50 7 N m (37 5 lb ft) (4) Torque for valve at closing ... 6 3 N m (4 2 lb ft) (5) Torque for 16 bolts ... 270 40 N m (200 30 lb ft) (6) Apply 5P-3931 Anti-Seize Compound on the surfaces of the housing that contact the bearings. (7) Lubricate the lip of the oil seal with grease. Lubricate the outside of the oil seal with grease before installing the oil seal in the cage.