AIR CLEANER GP 4212599 - Caterpillar

Diesel engine exhaust contains products of combustion which may be harmful to your health. Always start and operate the engine in a well ventilated area and, if in an enclosed area, vent the exhaust to the outside.
Mounting the Machine
* Mount the machine only where steps and/or handholds are provided.* Inspect, and when necessary, clean and have repairs made to steps and handholds before mounting. * Face the machine when mounting.* Maintain a three-point contact (two feet and one hand or one foot and two hands contact) with the steps and handholds.Machine Walk-Around Inspection
Remove frame lockpin and store in unlocked position as shown. The frame lockpin must be in the unlocked position to articulate the machine. Remove the wheel lean bolt from the locked position.
Do not operate the machine with the wheel lean bolt in the locked position. Machine damage may occur.
For maximum service life of the machine, make a thorough walk-around inspection before mounting the machine to start the engine.Look around and under the machine for loose bolts, trash buildup, oil or coolant leaks, broken or worn parts. Inspect the condition of the equipment and the hydraulic components.Check all of the oil, coolant and fuel levels.Refer to the Every 10 Service Hours or Daily in the Maintenance Section for more detailed information.Refer to Walk-Around Inspection in the Maintenance Section for detailed walk-around inspection information.Seat and Seat Belt Checks
Adjust the seat at the beginning of each shift or when changing operators.Adjust the seat to allow full travel of the pedals when the operator is seated against the seat back.Inspect the belt mounting hardware. Replace any damaged or worn hardware. Keep the mounting bolts tight.Fasten the seat belt before starting the engine.