AIR STARTING MOTOR GROUP 6N2449 - Caterpillar

6N2449 AIR STARTING MOTOR GROUP Caterpillar parts D342, D342C, G342C

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA6N2449
6N-2449
6N2449

Caterpillar 6N2449 AIR STARTING MOTOR GROUP

Weight: 60 pounds 27 kg.

Buy AIR STARTING MOTOR GROUP 6N2449 Caterpillar genuine, new aftermarket tractor parts with delivery
GAS ENGINE, MARINE ENGINE,

This part in 1 request: Show. This information for suppliers only!

#5565 6N-2449

2016-05-16

Compatible equipment models: 6N2449:

GAS ENGINE G342C

INDUSTRIAL ENGINE D342 D342C

MARINE ENGINE D342 D342C Caterpillar

Number on catalog scheme:

Caterpillar 6N2449 Parts scheme AIR STARTING MOTOR GROUP

For full view, you need register

Information:

Stopping the engine immediately after it has been working under load can result in overheating and accelerated wear of the engine components.Refer to the following stopping procedure, to allow the engine to cool, and to prevent excessive temperatures in the turbocharger center housing, (if equipped) which could cause oil coking problems.
Stopping The Engine From The Operator Compartment
Note: This procedure is used for shutting down the tractor engine and the scraper engine. When engine start switch (1) is turned to the OFF position, both engines will be shut down.
Use the procedure that is described in Operation and Maintenance Manual, "Stopping the Machine" in order to stop the machine.
Run the engine at low idle for 5 minutes. Do not stop the engine immediately after the engine has been working under load.
Illustration 1 g03111418
Turn engine start switch (1) to the OFF position. Remove the engine start switch key.
Illustration 2 g03732119
(1) STOP
(2) OFF
(3) ON
(4) STARTStopping The Engine From Outside Of The Operator Compartment
Note: Use the engine shutdown switch only when engine start switch (1) does not work or engine start switch (1) cannot be accessed.
Run the engine at low idle for 5 minutes. Do not stop the engine immediately after the engine has been working under load.
Illustration 3 g02126282
Move the engine shutdown switch to the OFF position. Refer to Operation and Maintenance Manual, "Engine Shutdown Switch" for further information.Note: The engine shutdown switch does not shut off the machines electrical system.Stopping The Scraper Engine From The Scraper
Run the engine at low idle for 5 minutes. Do not stop the engine immediately after the engine has been working under load.Note: There are two shutdown switches for the scraper engine. Use either switch (2) or switch (3) in order to stop the scraper engine.
Illustration 4 g06010063
Move the engine shutdown switch to the OFF position. Refer to Operation and Maintenance Manual, "Engine Shutdown Switch" for further information.Note: The engine shutdown switch does not shut off the machines electrical system.