AIR CLEANER GP 7C7713 - Caterpillar

Before Parking
When freezing temperatures are expected, each track roller frame should be cleaned of mud and dirt and the machine parked on planks. 1. Position boom over one side. 2. Apply boom down pressure to raise track clear of ground. 3. Run raised track in forward and reverse until the maximum amount of material is thrown clear. 4. Lower track to the ground.5. Repeat steps 1 through 4 for other track.6. Clean in and around carrier rollers.Parking
1. If engine is to be stopped, operate it at reduced speed for 5 minutes. 2. Move machine to a safe location, on level ground if possible. Lower all equipment and engage the hydraulic lock.Stopping the Engine
1. Reduce engine speed to low idle for 30 seconds then move governor control all the way forward. It will require a few seconds for the engine to stop. 2. Turn OFF the BATTERY DISCONNECT switch and remove the key.3. Secure and lock all access doors and all cab doors and windows.4. Install vandalism guards and covers.