ALARM GP-TRAVEL 2757115 - Caterpillar

Oil Sump Pump And Check Valve
1. Disconnect hose assembly (1) from the adapter and engine oil cooler bypass elbow (2). 2. Remove bolts (3) that hold adapter (5) and hose assembly (4) in position. Remove adapter (5) from the engine oil cooler bypass elbow. 3. Use a hammer and punch to push spring pin (9) out of pin (8) and adapter (5). Remove pin (8), spring (7) and valve (6) from adapter (5).4. Disconnect hose assembly (1) from the valve assembly. Disconnect hose assembly (12) from the elbow. 5. Remove the bolts that hold pump (10) to bracket (11) and remove pump (10).Install Oil Sump Pump And Check Valve
1. Put pump (1) and the oil lines in position. Install the bolts to hold the unit to bracket (5).2. Connect hose (4) to elbow (3). Connect hose (6) to valve assembly (2). 3. Install spring (8) and valve (7) on pin (9). Make sure the tapered end of valve (7) is toward adapter (10). 4. Put pin (9) in position in adapter (10) and install spring pin (11) to hold the unit together. Push pin (11) through pin (9) until pin (9) is in the center of the bore in adapter (10).5. Make sure O-ring seal (12) is in position on the engine oil cooler bypass elbow and put clean engine oil on it.6. Put adapter (10) in position and install the bolts to hold it and the clip for hose assembly (13). 7. Connect hose assembly (6) to adapter (10).8. If necessary, add clean engine oil to the correct level in the engine.