ALARM GP 3090867 - Caterpillar

3090867 ALARM GP Caterpillar parts C9

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA3090867
309-0867
3090867

Buy ALARM GP 3090867 Caterpillar genuine, new aftermarket tractor parts with delivery
GENERATOR SET,

Compatible equipment models: 3090867:

GENERATOR SET C9 Caterpillar

Number on catalog scheme:

Caterpillar 3090867 Parts scheme ALARM GP

For full view, you need register

Information:

Illustration 1 g02895736
Table 1
Specification for 322-9892 Bucket Linkage Gp
Item Qty Part Specification Description
Coat all bores for pins with 5P-0960 Grease Cartridge .
1 2 8T-4244 Nut Position the nut (1) to the distance 0.0 to 1.0 mm (0.00 to 0.04 inch) past the end of the bolt. For locking, tighten the nut (2) against the nut (1) .
Torque to
70 15 N m (52 11 lb ft).
2 2 8T-4244 Nut
3 - - During assembly of the linkage group on machine, rotate the rod end of the bucket cylinder to position the grease fitting away from the stick.
4 2 8T-4244 Nut Position the nut (5) to the distance
2.0 0.5 mm (0.08 0.02 inch) past the end of the bolt. For locking, tighten the nut (4) against the nut (5) .
Torque to
70 15 N m (52 11 lb ft).
5 2 8T-4244 Nut
6 4 150-5689 Shim As required, use the shim in order to adjust the lateral clearance to a maximum of
1.0 mm (0.04 inch):
Thickness is
1.0 mm (0.04 inch).
7 1 296-9480 Pin Diameter is
49.89 0.02 mm (1.964 0.001 inch).
8 1 296-9479 Pin Diameter is
54.890 0.023 mm (2.1610 0.0009 inch).
9 4 093-0064 Shim As required, use the shim in order to adjust the lateral clearance to a maximum of
1.0 mm (0.04 inch):
Thickness is
1.0 mm (0.04 inch).
10 2 296-9481 Pin Diameter is
49.89 0.02 mm (1.964 0.001 inch).
11 4 093-1432 Lip Type Seal Dust seal must be assembled such that lip is located to the out side of the boss and directed as shown.
12 2 218-5197 Bushing Bore diameter before assembly is
55.200 0.025 mm (2.1732 0.0010 inch).
Installation depth is
5.0 0.5 mm (0.20 0.02 inch).
13 2 296-9578 Lip Type Seal Dust seal must be assembled such that lip is located to the out side of the boss and directed as shown.
14 2 296-9438 Bushing Bore diameter before assembly is
50.200 0.015 mm (1.9764 0.0006 inch).
Installation depth is
9.5 0.8 mm (0.37 0.03 inch).