ALARM AS-BACKUP 3E7738 - Caterpillar

Remove Timing Gear Cover
START BY:a. remove water pumpb. remove automatic timing advancec. remove crankshaft front seal and wear sleeved. remove sea water pump (marine engine)e. remove oil pan Marine engine is shown.1. Remove the engine front support. 2. Remove the bolts that hold timing gear cover (2) to the cylinder block.3. Remove spacers (1).4. Remove elbow (3). Remove bolts (5). Turn elbow (4) so the timing gear cover will clear the elbow as shown.5. Remove the timing gear cover.Install Timing Gear Cover
1. Put clean engine oil on the O-ring seal for fuel injection pump housing (3).2. Install a new gasket on the cylinder block. Cut the gasket even with the bottom of the cylinder block.3. Put timing gear cover (2) in position on the engine. Push cover (2) until it is tight against the cylinder block.4. Install spacers (1). Install the bolts that hold cover (2) to the cylinder block.5. Put elbow (5) in alignment with water line (6). Install the four bolts that hold elbow (5) to line (6).6. Install elbow (4).7. Install the engine front support.END BY:a. install water pumpb. install automatic timing advancec. install crankshaft front seal and wear sleeved. install sea water pump (marine engine)e. install oil pan