1072519 ALTERNATOR GP-CHARGING Caterpillar parts
3208
Rating:
Alternative (cross code) number:
CA1072519
107-2519
1072519
CA1072519
107-2519
1072519
Weight: 10 pounds 4 kg.
MARINE ENGINE,
Compare Prices:
As an associate, we earn commssions on qualifying purchases through the links below
Crosby HG-4037 Galvanized Steel Right Hand Jaw End Turnbuckle, 3/4" Shank Diameter x 12" Take Up, 5200lbs Load Capacity
Crosby Right hand jaw end fitting || Open body || Fittings are galvanized, quenched and tempered; meets/exceeds ASME B30.26 requirements || Forged jaw ends are fitted with pins and cotters || Stock no: HG-4037; modified UNJ thread for improved fatigue properties || ASME B30.26
Crosby Right hand jaw end fitting || Open body || Fittings are galvanized, quenched and tempered; meets/exceeds ASME B30.26 requirements || Forged jaw ends are fitted with pins and cotters || Stock no: HG-4037; modified UNJ thread for improved fatigue properties || ASME B30.26
Crosby HG-4037 Galvanized Steel Right Hand Jaw End Turnbuckle, 3/4" Shank Diameter x 12" Take Up, 5200lbs Load Capacity
Crosby Right hand jaw end fitting || Open body || Fittings are galvanized, quenched and tempered; meets/exceeds ASME B30.26 requirements || Forged jaw ends are fitted with pins and cotters || Stock no: HG-4037; modified UNJ thread for improved fatigue properties || ASME B30.26
Crosby Right hand jaw end fitting || Open body || Fittings are galvanized, quenched and tempered; meets/exceeds ASME B30.26 requirements || Forged jaw ends are fitted with pins and cotters || Stock no: HG-4037; modified UNJ thread for improved fatigue properties || ASME B30.26
STORAGE Black Sign Arrow Down Aluminum Composite Sign 8.5 x 10 inches
Work House Signs Enhance Safety & Organization Anywhere – Perfect for offices, warehouses, schools, and more! These black directional arrow signs clearly mark important areas to improve safety and maintain a neat, professional space. || Available in 3 Versatile Sizes – Choose from multiple sizes to fit your specific needs. Whether it’s a tight corner or a large wall, these signs adapt easily to any space or setting. || Built to Last Indoors & Outdoors – Crafted from premium aluminum composite, our signs are weather-resistant, fade-proof, and durable enough to handle tough environments year-round. || Flexible, Easy-to-Mount Design – Comes with no pre-drilled holes, giving you the freedom to drill where needed. Compatible with screws, adhesives, or zip ties depending on your surface. || Proudly Made in the USA – Designed, printed, and assembled by our dedicated small business team in Pennsylvania. Quality craftsmanship and fast, friendly support you can trust.
Work House Signs Enhance Safety & Organization Anywhere – Perfect for offices, warehouses, schools, and more! These black directional arrow signs clearly mark important areas to improve safety and maintain a neat, professional space. || Available in 3 Versatile Sizes – Choose from multiple sizes to fit your specific needs. Whether it’s a tight corner or a large wall, these signs adapt easily to any space or setting. || Built to Last Indoors & Outdoors – Crafted from premium aluminum composite, our signs are weather-resistant, fade-proof, and durable enough to handle tough environments year-round. || Flexible, Easy-to-Mount Design – Comes with no pre-drilled holes, giving you the freedom to drill where needed. Compatible with screws, adhesives, or zip ties depending on your surface. || Proudly Made in the USA – Designed, printed, and assembled by our dedicated small business team in Pennsylvania. Quality craftsmanship and fast, friendly support you can trust.
Number on catalog scheme:
1
For full view, you need register
Compatible equipment models: 1072519:
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Information:
Illustration 1 g01032924
Occupy the seat.
Place the armrest in the DOWN position.
Turn the key start switch to the ON position.Expected Result:The parking brake indicator should be on.Results:
OK - The parking brake indicator is on. Proceed to Test Step 4.
NOT OK - The parking brake indicator is flashing. Proceed to Test Step 2.
NOT OK - The parking brake indicator is off.Repair: The parking brake indicator is not working properly. See Testing and Adjusting, "Parking Brake Indicator and Armrest Indicator Do Not Function Correctly". Stop.Test Step 2. CHECK THE CIRCUIT FOR THE PARKING BRAKE SWITCH FOR A SHORT TO GROUND
Turn the key start switch to the OFF position.
Raise the cab. See Operation and Maintenance Manual, "Cab Tilting".
Locate the interlock ECM. The interlock ECM is located on the left side of the machine beneath the access cover on the floor of the machine.
Disconnect the wire harness from the ECM.
Measure the resistance from contact 42 to contact 3 (wire F780-PK to wire 201-BK) on the wire harness connector.Expected Result:The resistance should be greater than 3000 Ohms.Results:
OK - The resistance is greater than 3000 Ohms.Repair: The ECM is very unlikely to have failed. Reconnect all connections and visually inspect the wire harness. Verify that the diagnostic code still exists. If the diagnostic code still exists perform the Test Steps again.Replace the ECM, if the cause of the diagnostic code was not found after the second attempt. See Testing and Adjusting, "Electronic Control Module (ECM) - Replace". Stop.
NOT OK - The resistance is not greater than 3000 Ohms. Proceed to Test Step 3.Test Step 3. CHECK THE PARKING BRAKE SWITCH
Lower the cab.
Remove the parking brake switch.
Disconnect the wire harness from the switch.
Measure the resistance from terminal 2 to terminal 3 of the parking brake switch.Expected Result:The resistance should be greater than 5000 Ohms.Results:
OK - The resistance is greater than 5000 Ohms.Repair: The wire harness has failed. Repair the wire harness and/or the connector or replace the wire harness and/or the connector. Stop.
NOT OK - The resistance is not greater than 5000 Ohms.Repair: The parking brake switch has failed. Replace the parking brake switch. Stop.Test Step 4. CHECK FOR A FLASHING PARKING BRAKE INDICATOR AFTER THE SYSTEM IS ENABLEDNote: The seat will still need to be occupied and the armrest will need to be down. The key start switch will also need to be in the ON position.
Press and release the parking brake switch.Expected Result:The parking brake light should be off.Results:
OK - The parking brake light is off.Repair: There is no problem at this time. Stop.
NOT OK - The parking brake is flashing. Proceed to Test Step 5.Test Step 5. CHECK THE CIRCUIT OF THE HYDROSTATIC PILOT VALVE
Turn the key start switch to the OFF position.
Raise the cab. See Operation and Maintenance Manual, "Cab Tilting".
Locate the interlock ECM. The interlock ECM is located on the left side of the machine beneath the access cover on the floor of the machine.
Disconnect the wire harness from the ECM.
Measure the resistance between contact 29 and contact 68 (wire H416-GN and
Parts alternator Caterpillar catalog:
3114, 3116, 3126, 3126B, 3176B, 3176C, 3196, 3208, 3304, 3304B, 3306, 3306B, 3406, 3406B, 3406C, 3406E, 3408, 3408B, 3408C, 3412, 3412C, 3412D, 3412E, C-12, C15, C18, G3304, G3304B, G3306, G3306B, G34...
3208, 3304, 3306, 3406, 3406B, 3408, 3412, D342, D342C, D343, G3306, G342C, G343
3114, 3116, 3126, 3126B, 3176B, 3176C, 3196, 3208, 3304, 3306, 3306B, 3406B, 3406E, C-12, C15, C18, CB-614, G3304, G3306
65, 65C, 70C, 75, 75C, 85C
1426117
ALTERNATOR GP-CHARGING
3412, 3412C, SPS342, SPT342
3412, 3412C, SPS342, SPT342
7E9513
ALTERNATOR GP-CHARGING
225D, 231D
225D, 231D
1164544
ALTERNATOR GP-CHARGING
3116, 3126
3116, 3126
1164543
ALTERNATOR GP-CHARGING
3116, 3126
3116, 3126
1156956
ALTERNATOR GP-CHARGING
3116, 3126
3116, 3126