10R2576 ALTERNATOR GP Caterpillar parts
Rating:
Alternative (cross code) number:
CA10R2576
10R-2576
10R2576
CA10R2576
10R-2576
10R2576
Weight: 20 pounds 9 kg.
Related part:
5I8085
ALTERNATOR GP
10R2576
R
Cross Reference:
CATERPILLAR
10R2576,
5I8085,
FARCOM
112050,
MITSUBISHI
34363-02300,
34368-02300,
A004TU3586,
A4TU3586,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
OEG Parts New Rectifier 24 Volt Compatible With Caterpillar 313C SR 08-09 A860X53170, 172-48138, 10R-2576, 212-8561, 2128561, 5I8085, A004TU3586, A004TU3599; 34368-02300
OEG Parts Replacement Part Numbers: 172-48138, A860X53170, 17248138 || Condition: New; Voltage: 24V; Amperage: 8-40A; Mounting Hardware Included: No; Number of Terminals: 4; Number of Pieces: 1; Country of Origin: CN || Brand New - Manufactured with New Premium Quality Components - Engineered to Meet or Exceed OEM Specifications - All Items Tested for Reliability, Durability and Performance || See Product Description for Additional Specifications
OEG Parts Replacement Part Numbers: 172-48138, A860X53170, 17248138 || Condition: New; Voltage: 24V; Amperage: 8-40A; Mounting Hardware Included: No; Number of Terminals: 4; Number of Pieces: 1; Country of Origin: CN || Brand New - Manufactured with New Premium Quality Components - Engineered to Meet or Exceed OEM Specifications - All Items Tested for Reliability, Durability and Performance || See Product Description for Additional Specifications
#US Replace Parts Alternator for Caterpillar Excavator 24 Volt 2128561 5I8085 10R2576 A4TU (AikePart1025-9868)
Generic NOTE: It's a replacement parts, but it's not genujne || Model number is just for reference, Product will not work for every model. || Due to storage, there may be some minor scratches. || Part Number: for A004TU3586 || Model: for 311 313 314 315 317 318 320 323
Generic NOTE: It's a replacement parts, but it's not genujne || Model number is just for reference, Product will not work for every model. || Due to storage, there may be some minor scratches. || Part Number: for A004TU3586 || Model: for 311 313 314 315 317 318 320 323
OEG Parts New Rectifier 24 Volt Compatible With Caterpillar 313C SR 08-09 A860X53170, 172-48138, 10R-2576, 212-8561, 2128561, 5I8085, A004TU3586, A004TU3599; 34368-02300
OEG Parts Replacement Part Numbers: 172-48138, A860X53170, 17248138 || Condition: New; Voltage: 24V; Amperage: 8-40A; Mounting Hardware Included: No; Number of Terminals: 4; Number of Pieces: 1; Country of Origin: CN || Brand New - Manufactured with New Premium Quality Components - Engineered to Meet or Exceed OEM Specifications - All Items Tested for Reliability, Durability and Performance || See Product Description for Additional Specifications
OEG Parts Replacement Part Numbers: 172-48138, A860X53170, 17248138 || Condition: New; Voltage: 24V; Amperage: 8-40A; Mounting Hardware Included: No; Number of Terminals: 4; Number of Pieces: 1; Country of Origin: CN || Brand New - Manufactured with New Premium Quality Components - Engineered to Meet or Exceed OEM Specifications - All Items Tested for Reliability, Durability and Performance || See Product Description for Additional Specifications
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A Loctite C5-A Copper Antiseize - Start By:
Remove the air inlet manifold. Note: The following clamps and bellows are one-time use components. Discard the components after removal and install new components.
Illustration 1 g03589802
Engine was not illustrated for photographic purposes.
Note: Note the orientation of clamps (2). If installed incorrectly, the clamps will damage the heat shields.
Loosen clamps (2). Remove bolts (4) and any spacers.
Remove exhaust manifold (3) and remove bellows (1) and the gaskets. Remove gasket (5) from exhaust manifold (3).
Repeat Step 1 and Step 2 for the next four exhaust manifolds. Repeat for the other side.
Illustration 2 g03589914Note: Note the orientation of clamps (10). If installed incorrectly, the clamps will damage the heat shields.
Loosen clamps (10). Remove bolts (12) and any spacers.
Remove exhaust manifold (11). Remove bellows (9) and (8) and the gaskets. Remove gasket (13) from exhaust manifold (11). Note: The only gasket for bellows (8) will be located on the exhaust manifold side of the bellows. Note the orientation of bellows (8) for installation. The air flow direction is from the exhaust manifold to the turbocharger.
Repeat Step 4 and Step 5 for the other side. Note: Some engine arrangements are equipped with a cap in place of adapter (7) for the exhaust bypass valve. If so, the following step can be ignored.
Remove bolts (6) and adapter (7). Remove the gasket from adapter (7). Installation Procedure
Note: The following clamps and bellows are one-time use components. Discard the components after removal and install new components.
Install exhaust manifolds (11) in the reverse order of removal.
Apply Tooling (A) to the threads of bolts (6). Tighten bolts (6) to a torque of 55 5 N m (41 4 lb ft).
Apply Tooling (A) to threads and bearing surfaces of clamps (2). Tighten clamps (2) to a torque of 25 6 N m (221 53 lb in).
Tighten clamps (10) to a torque of 8.5 1 N m (75. 9 lb in).
Table 1
Required Tools
Tool Part Number Part Description Qty
A Loctite C5-A Copper Antiseize - Start By:
Remove the air inlet manifold. Note: The following clamps and bellows are one-time use components. Discard the components after removal and install new components.
Illustration 1 g03589802
Engine was not illustrated for photographic purposes.
Note: Note the orientation of clamps (2). If installed incorrectly, the clamps will damage the heat shields.
Loosen clamps (2). Remove bolts (4) and any spacers.
Remove exhaust manifold (3) and remove bellows (1) and the gaskets. Remove gasket (5) from exhaust manifold (3).
Repeat Step 1 and Step 2 for the next four exhaust manifolds. Repeat for the other side.
Illustration 2 g03589914Note: Note the orientation of clamps (10). If installed incorrectly, the clamps will damage the heat shields.
Loosen clamps (10). Remove bolts (12) and any spacers.
Remove exhaust manifold (11). Remove bellows (9) and (8) and the gaskets. Remove gasket (13) from exhaust manifold (11). Note: The only gasket for bellows (8) will be located on the exhaust manifold side of the bellows. Note the orientation of bellows (8) for installation. The air flow direction is from the exhaust manifold to the turbocharger.
Repeat Step 4 and Step 5 for the other side. Note: Some engine arrangements are equipped with a cap in place of adapter (7) for the exhaust bypass valve. If so, the following step can be ignored.
Remove bolts (6) and adapter (7). Remove the gasket from adapter (7). Installation Procedure
Note: The following clamps and bellows are one-time use components. Discard the components after removal and install new components.
Install exhaust manifolds (11) in the reverse order of removal.
Apply Tooling (A) to the threads of bolts (6). Tighten bolts (6) to a torque of 55 5 N m (41 4 lb ft).
Apply Tooling (A) to threads and bearing surfaces of clamps (2). Tighten clamps (2) to a torque of 25 6 N m (221 53 lb in).
Tighten clamps (10) to a torque of 8.5 1 N m (75. 9 lb in).
Parts alternator Caterpillar catalog:
Caterpillar
Caterpillar
20R3597
ALTERNATOR GP -B
Caterpillar
Caterpillar
Caterpillar
0R2787
ALTERNATOR GP -B
Caterpillar
Caterpillar
Caterpillar
0076433
ALTERNATOR
Caterpillar
Caterpillar
0070553
ALTERNATOR
Caterpillar
Caterpillar
0070324
ALTERNATOR
Caterpillar
Caterpillar
Caterpillar
Caterpillar
0R3616
ALTERNATOR GP -B
Caterpillar
Caterpillar