ALTERNATOR GP -A 10R7562 - Caterpillar

Illustration 1 g03201536
Top view
Table 1
Specification for 199-3429 Accessory Drive Gp    
Item     Qty     Part     Specification Description    
1     1     441-3369 Adapter As     After installation, bore of 127-5400 Bushing is 75.140 0.055 mm (2.9583 0.0022 inch).
Installation depth of bushing is
1.5 mm (0.06 inch).    
2     2     259-4598 O-Ring Seal     Before assembly, lightly lubricate the bore with the lubricant that is being sealed.    
3     1     199-2889 Idler Shaft     Diameter is
105.880 0.020 mm (4.1685 0.0008 inch).    
4     1     7N-5874 Auxiliary Drive Shaft     Diameter is
74.900 0.015 mm (2.9488 0.0006 inch).
Width of the groove for the thrust washer (7) is
8.75 0.10 mm (0.344 0.004 inch).    
5     1     155-2307 Idler Gear As     After installation, bore of 116-1365 Bearing is
105.970 0.010 mm (4.1720 0.0004 inch).
Installation depth of bearing is
2.3 0.5 mm (0.09 0.02 inch).    
6     1     164-4995 Washer Assembly     Thickness of 164-4996 Thrust Washer is
7.00 0.15 mm (0.276 0.006 inch).
Protrusion of 7N-2047 Dowel is
4.5 0.5 mm (0.18 0.02 inch).    
7     2     7N-7539 Thrust Washer     Thickness is
8.50 0.05 mm (0.335 0.002 inch).