ALTERNATOR AR-CHARGING 1110342 - Caterpillar

Clean all parts and inspect all parts. If any parts are worn or damaged, use new Caterpillar parts for replacement.
Illustration 1 g01188833
Use Tooling (B) in order to install lip seal (13) into housing (11).
Illustration 2 g01195296
Apply Tooling (C) to lip seal (13) on housing (11) before installing the housing onto bracket (3).
Illustration 3 g01188834
Install bearing race (12) onto the floor roller with the shoulder on the bearing race toward bracket (3).
Illustration 4 g01188835
Apply Tooling (C) to the bearing cavity between bearing race (12) and housing (11).
Illustration 5 g00896615
Install roller bearing (9).
Illustration 6 g01195297
Install O-ring seal (7) onto housing (11) and roller bearing (9).
Illustration 7 g01188836
Apply Tooling (C) to roller bearing (9).
Illustration 8 g00896631
Install inner plate (8) onto roller bearing (9).
Illustration 9 g00926131
Install O-ring seal (6) onto bracket (3).
Illustration 10 g00926132
Install cap (2) onto bracket (3) before securing the cap in place with bolt (1).
Illustration 11 g01188837
Use Tooling (B) to install lip seal (10) into bottom wheel (5).
Illustration 12 g00926133
Apply Tooling (C) to lip seal (10) on bottom wheel (5) before positioning the bottom wheel to housing (11). Install three bolts (4) and the washers. Tighten the bolts in equal amounts in order to pull the bottom wheel onto the housing.
Illustration 13 g00896633
Install remaining bolts (4) and the washers in order to secure bottom wheel (5) to housing (11).
Illustration 14 g00926134
Repeat Step 2 through 14 in order to install the wheel on the opposite side of bracket (3). End By:
Install the ejector blade floor roller onto the machine. Refer to Disassembly and Assembly Manual, "Ejector Blade Floor Rollers - Install".