ALTERNATOR GP-CHARGING 1179741 - Caterpillar

Do not operate or work on this equipment unless you have read and understand the instructions and warnings in the Operation and Maintenance Manuals. Failure to follow the instructions or heed the warnings could result in serious injury or death.
Falling Hazard (12) (If Equipped)Safety message (12) is located on the blade angle cylinders.
Illustration 14 g01108716
To prevent possible personal injury during installation and removal of the laser receivers, lower the mast to the minimum height and use an approved access system to reach the mounting locations of the laser receivers at the top of the mast. Do not climb on the blade.
Rotating Fan (13)Safety message (13) is located on the front of the cooling system fan door.
Illustration 15 g02176339
Rotating fan blades can result in personal injury or death.Stop the engine and allow the fan to come to a complete stop before making any test or adjustment.Before starting the engine, make sure all of the finger guards are installed and the guard door is closed. Do not allow any tools or test equipment to protrude or vibrate into the path of the rotating fan blades.
Hot Fluid Under Pressure (14)Safety message (14) is located in two places. One location is under the access door to the radiator cap. The other location is outside the access door in the front bottom guard.
Illustration 16 g01371640
Pressurized system! Hot coolant can cause serious burns, injury or death. To open the cooling system filler cap, stop the engine and wait until the cooling system components are cool. Loosen the cooling system pressure cap slowly in order to relieve the pressure. Read and understand the Operation and Maintenance Manual before performing any cooling system maintenance.
Do Not Operate (15) (Winch)Safety message (15) is located on the right side of the machine on the vertical wall of the winch frame, if equipped.
Illustration 17 g01370904
Do not operate or work on this equipment unless you have read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings could result in injury or death. Contact any Cat dealer for replacement manuals. Proper care is your responsibility.
No Step (16)Safety message (16) is on the right side of the machine on the vertical wall of the winch frame, if equipped.
Illustration 18 g01370910
Do not use this surface as a step or platform. This surface may not support additional weight or may be slippery. Serious injury or death could occur from a fall.
LaserIf your machine is equipped with the AccuGrade - Laser System, this safety message is on each leg of the tripod for the laser.
Illustration 19 g01282876
Movement of the transmitter could cause unexpected blade movement. Death or serious injury could occur. Turn off the transmitter before you move the transmitter or before you adjust the transmitter.