ALTERNATOR GP-CHARGING 1270303 - Caterpillar

Illustration 1 g00330150
Components of the Limited Slip Differential (1) Differential ring gear. (2) Pinion gear. (3) Pinions. (4) Right side gear. (5) Right axle shaft. (6) Clutch packs. (7) Differential case. (8) Spider. (9) Left side gear. (10) Left axle shaft.The limited slip differential is identical on the left side and the right side of the spider (8). The limited slip differential contains the following components: differential ring gear (1), four pinion gears (3), right side gear (4), two clutch packs (6), differential case (7), spider (8) and left side gear (9). The right axle shaft (5) is splined to the right side gear (4). The left axle shaft (10) is splined to the left side gear (9).
Illustration 2 g00330703
Components of the Clutch Packs (3) Pinions. (7) Differential case. (9) Side gear. (11) Clutch discs. (12) Clutch plates. (13) Pressure disc. The clutch pack (6) contains the following components: four clutch discs (11), five clutch plates (12) and pressure disc (13). The clutch discs (11) are splined to the side gears (4) and (9). The clutch plates (12) are splined to the differential case (7) .The limited slip differential operates identically to a standard differential during straight forward operation or during straight reverse operation. The limited slip differential provides approximately 20 percent torque to each wheel.When the machine is in a turn, the inside wheel is more resistant than the outside wheel to the turn. The resistance in the inside wheel overcomes the clutch pack. The clutch pack slips and the limited slip differential turns the outside wheel identically to a standard differential.When one wheel has more traction than the other wheel, the limited slip differential sends the torque to the wheel with the most traction. The clutch packs allow the differential to send the power to the wheel with the most traction. A standard differential could only transfer the same amount of torque from the slipping side to the opposite side.