ALTERNATOR GP-CHARGING 1321191 - Caterpillar

Illustration 1 g01199697
(1) Tank Capacity ... 190 L (50 US gal) (2) Tighten 145-7028 Temperature Sensor Gp to the following torque. ... 2.6 N m (23 lb in) (3) The fluid level switch has an arrow which should be pointing upward to the top of the hydraulic tank in order to work correctly. Tighten 172-8660 Liquid Level Switch to the following torque. ... 33 4 N m (24.5 3.0 lb ft) (4) Install 077-3951 Hydraulic Oil Filler Cap with the gasket. Discard the hardware that comes with the 077-3951 Hydraulic Oil Filler Cap. 1G-7663 Suction Strainer
Illustration 2 g01118876
Suction Strainer Maximum flow rate ... 125 L/min (33 US gpm) Filtration ... 100 mesh Bypass pressure ... 21 kPa (3 psi) (5) Tighten 115-9685 Sight Gauge Gp with the following torque. ... 9.0 0.9 N m (80 8 lb in) 250-2783 Suction Strainer
Illustration 3 g01118877
Suction Strainer Minimum flow rate ... 151.5 L (40.0 US gal) Filtration ... 100 mesh Bypass pressure ... 21 kPa (3 psi)Hydraulic Oil Tank Filter
Illustration 4 g01118880
Bypass pressure ... 170 kPa (25 psi)Maximum flow rate ... 190 L/min (50 US gpm)Filtration ... 6 micron nominal