1382260 ALTERNATOR GP-CHARGING Caterpillar parts
902
Rating:
Alternative (cross code) number:
CA1382260
138-2260
1382260
CA1382260
138-2260
1382260
COMPACT WHEEL LOADER,
Compatible equipment models: 1382260:
Number on catalog scheme:
For full view, you need register
Caterpillar SIS machinery equipment:
Information:
Removal Procedure
Personal injury can result from hot coolant, steam and alkali.At operating temperature, engine coolant is hot and under pressure. The radiator and all lines to heaters or the engine contain hot coolant or steam. Any contact can cause severe burns.Remove cooling system pressure cap slowly to relieve pressure only when engine is stopped and cooling system pressure cap is cool enough to touch with your bare hand.Do not attempt to tighten hose connections when the coolant is hot, the hose can come off causing burns.Cooling System Coolant Additive contains alkali. Avoid contact with skin and eyes.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Drain the level of coolant from the radiator below the coolant temperature switch. Drain the coolant into a suitable container for storage or disposal.
Disconnect the electrical connection to the coolant temperature switch.
Illustration 1 g00814982
Remove coolant temperature switch (1) from the elbow.Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Apply a thin coat of 5P-3413 Pipe Sealant to coolant temperature switch (1) .
Illustration 2 g00814982
Install coolant temperature switch (1). Tighten coolant temperature switch (1) to a torque of 7 to 12 N m (62 to 106 lb in).
Reconnect the electrical connection to the coolant temperature switch.
Fill the cooling system with coolant to the correct level. Refer to the Operation and Maintenance Manual, "Refill Capacities" topic for more information.
Personal injury can result from hot coolant, steam and alkali.At operating temperature, engine coolant is hot and under pressure. The radiator and all lines to heaters or the engine contain hot coolant or steam. Any contact can cause severe burns.Remove cooling system pressure cap slowly to relieve pressure only when engine is stopped and cooling system pressure cap is cool enough to touch with your bare hand.Do not attempt to tighten hose connections when the coolant is hot, the hose can come off causing burns.Cooling System Coolant Additive contains alkali. Avoid contact with skin and eyes.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Drain the level of coolant from the radiator below the coolant temperature switch. Drain the coolant into a suitable container for storage or disposal.
Disconnect the electrical connection to the coolant temperature switch.
Illustration 1 g00814982
Remove coolant temperature switch (1) from the elbow.Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Apply a thin coat of 5P-3413 Pipe Sealant to coolant temperature switch (1) .
Illustration 2 g00814982
Install coolant temperature switch (1). Tighten coolant temperature switch (1) to a torque of 7 to 12 N m (62 to 106 lb in).
Reconnect the electrical connection to the coolant temperature switch.
Fill the cooling system with coolant to the correct level. Refer to the Operation and Maintenance Manual, "Refill Capacities" topic for more information.
Parts alternator Caterpillar catalog:
216, 301.5, 302.5, 303.5, 304.5, 902
302.5C, 902
1578040
ALTERNATOR GP-CHARGING
550, 570, 580
550, 570, 580
1455959
ALTERNATOR GP-CHARGING
345B L, 365B, 365B II
345B L, 365B, 365B II
2454759
ALTERNATOR GP-CHARGING
933C, 939C
933C, 939C
1554814
ALTERNATOR GP-CHARGING
3116, 3126
3116, 3126
1546037
ALTERNATOR GP-CHARGING
35, 45, 55
35, 45, 55