1493495 ALTERNATOR GP-CHARGING Caterpillar parts
902
Rating:
Alternative (cross code) number:
CA1493495
149-3495
1493495
CA1493495
149-3495
1493495
COMPACT WHEEL LOADER,
Compatible equipment models: 1493495:
Number on catalog scheme:
For full view, you need register
Caterpillar SIS machinery equipment:
Information:
Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Note: Disconnect all electrical connections to the engine oil pressure switch before proceeding. Mark all connections for later installation.
Illustration 1 g00815016
Remove engine oil pressure switch (1) from the cylinder block.Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g00815016
Install engine oil pressure switch (1) in the cylinder block.
Tighten engine oil pressure switch (1) to a torque of 7 to 12 N m (62 to 106 lb in).Note: Reconnect all electrical connections to the engine oil pressure switch before you operate the engine.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Note: Disconnect all electrical connections to the engine oil pressure switch before proceeding. Mark all connections for later installation.
Illustration 1 g00815016
Remove engine oil pressure switch (1) from the cylinder block.Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g00815016
Install engine oil pressure switch (1) in the cylinder block.
Tighten engine oil pressure switch (1) to a torque of 7 to 12 N m (62 to 106 lb in).Note: Reconnect all electrical connections to the engine oil pressure switch before you operate the engine.
Parts alternator Caterpillar catalog:
216, 301.5, 302.5, 303.5, 304.5, 902
302.5C, 902
1578040
ALTERNATOR GP-CHARGING
550, 570, 580
550, 570, 580
1455959
ALTERNATOR GP-CHARGING
345B L, 365B, 365B II
345B L, 365B, 365B II
2454759
ALTERNATOR GP-CHARGING
933C, 939C
933C, 939C
1546037
ALTERNATOR GP-CHARGING
35, 45, 55
35, 45, 55