ALTERNATOR GP-CHARGING 1860163 - Caterpillar

Illustration 3 g01120901Use handle (4) to adjust the height of the seat. Place the handle in the operating position. Turning the handle clockwise increases the height of the seat. Turning the handle counterclockwise decreases the height of the seat. If your machine is equipped with an air ride suspension, the seat will be equipped with a lever. Pull up the lever to raise the height of the seat. Push down on the lever to lower the seat. If the adjustment is correct, indicator (3) will turn green. If the indicator shows red, further adjustment is required.To adjust the seat forward or backward, pull up lever (5) and hold the lever. Move the seat to the desired position. To lock the seat in the selected position, release the lever.
Illustration 4 g01120893To move the seat, the left console, and the right console forward or backward as one unit, pull up lever (6) and hold the lever. Hold the seat in the desired position. Release the lever to lock the seat, the left console, and the right console.To adjust the angle of the armrest, operate dial (7). A dial is on the bottom of each armrest. Place the armrests in the upright position when you enter the machine or when you exit the machine.The lumbar support is located in the back of the seat. Turn knob (8) (if equipped) counterclockwise to increase the force of the lumbar support. To decrease the lumbar support, continue to turn the knob counterclockwise.The height of the armrest can be adjusted. Squeeze lever (9) to adjust the height of the armrest. Move the armrest upward or move the armrest downward. Release the lever when the armrest is in the desired position.The operator can adjust the height of headrest (if equipped). To adjust the headrest, hold the headrest with both hands. Move the headrest up and down. Release the headrest when the desired position is attained. The headrest will remain in the desired position.Type 2
Illustration 5 g01636841
(1) Adjustment lever for the lumbar support
(2) Adjustment lever for reclining the seat
(3) Lever for the seat cushion adjustment
(4) Seat fore and aft adjustment.
(5) Seat height adjustment
(6) Fore and aft seat and console adjustment
(7) Console adjustment
(8) Indicator
(9) Seat angle lever
(10) Armrest
(11) HeadrestThe lumbar support is located in the back of the seat. Turn knob (1) (if equipped) counterclockwise to increase the force of the lumbar support. To decrease the lumbar support, continue to turn the knob counterclockwise.Pull up lever (2) to change the angle of the seat. Hold the seat back in the desired position. Release the lever.Push in lever (3) to adjust the length of the cushion.To adjust the seat forward or backward, pull up lever (4) and hold the lever. Move the seat to the desired position. To lock the seat in the selected position, release the lever.Note: Before adjusting the seat forward or backward, make sure that the lever for the seat height adjustment (5) is in the downward position.Turn lever (5) to adjust the seat and the console to the