ALTERNATOR GP-CHARGING 1916630 - Caterpillar

Improper Connections of The Jump Start Cable (9)
Illustration 12 g01370909This safety message is on the underside of the battery compartment access cover on the right-hand side of the machine.
There is limited battery access. Jump starting at the battery, or improper jumper cable connections at the starter, can cause explosion resulting in personal injury.Do not jump start the machine at the battery. Use the remote starting receptacle or jump start to the positive battery post on the starter.If remote starting receptacle can not be used, jumper cables may be used at the starter. Always connect the positive (+) cable to positive (+) terminal of the starter and connect negative (−) cable from external source to engine block. Follow procedure from the Operation and Maintenance Manual.
Pressurized System (10)
Illustration 13 g01371640This safety message is on the underside of the access cover for the radiator filler cap.
Pressurized system: Hot coolant can cause serious burn. To open cap, stop engine, wait until radiator is cool. Then loosen cap slowly to relieve the pressure.
Pressurized System (11)This safety message is on the right-hand platform on the underside of the access cover to the hydraulic tank filler cap.
Illustration 14 g01371640
At operating temperature, the hydraulic tank is hot and under pressure.Hot oil and components can cause personal injury. Do not allow hot oil or components to contact skin.Remove the filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand. Remove the filler cap slowly to relieve pressure.
Crushing Hazard (12)
Illustration 15 g01371647This safety message is on the right-hand side of the machine near the articulation joint.
Connect the steering frame lock between the front and the rear frames before lifting, transporting, or servicing the machine in the articulation area. Disconnect the steering frame lock and secure the steering frame lock before resuming operation. Severe injury or death could occur.
Parking Brake (13)
Illustration 16 g01435623This safety message is on the cover of the parking brake near the articulation joint.
Before you manually release the parking brake, be sure to stop the engine and block the wheels in order to prevent machine movement, which could result in personal injury.Before disassembling the brake, relieve the brake oil pressure by repeatedly applying the brakes until the brake oil pressure gauge indicates zero.Refer to Operation and Maintenance Manual, "Parking Brake Manual Release" for the proper procedure.
Electrical Shock Hazard (14)
This safety message is located in four places on the power inverter. This safety message is located in three places on the propulsion motor. This safety message is located in one place on the generator. This safety message is located in one place inside the bumper near the hazardous voltage present lamp.
Illustration 17 g01404264
DANGER: Shock/Electrocution Hazard - Do not operate this equipment or work on this equipment unless you have read and understand the instructions and warnings in the Service Manual. Failure to follow the instructions or heed the warnings will result in serious injury or death.