ALTERNATOR GP 1G7266 - Caterpillar

1G7266 ALTERNATOR GP Caterpillar parts AP-800

Price: query

Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA1G7266
1G-7266
1G7266

Weight: 10 pounds 4 kg.

Buy ALTERNATOR GP 1G7266 Caterpillar genuine, new aftermarket tractor parts with delivery
ASPHALT PAVER,

Compatible equipment models: 1G7266:

ASPHALT PAVER AP-800 Caterpillar

Number on catalog scheme: 1

Caterpillar 1G7266 Parts scheme ALTERNATOR GP

For full view, you need register

Caterpillar parts catalog:

Caterpillar parts catalog
Product:

AP-800B ASPHALT PAVER 1BF00225-UP (MACHINE) POWERED BY 4.236 ENGINE

1G-7265: MOUNTING GP-ALTERNATOR » c547061

Information:

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
E 221-9777 Sleeve Installer 1
F 4C-5552 Large Bore Brush 1
G 4C-9507 Retaining Compound 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Thoroughly clean the unit injector sleeves and the bores for the unit injectors with Tooling (F) .
Illustration 1 g02021929
Apply clean engine oil to O-ring seals (2) . Install O-ring seals (2) on unit injector sleeve (1) .
Position unit injector sleeve (1) on Tooling (E) .
Apply a thin coating of Tooling (G) around the outer circumference of unit injector sleeve (1) at Area (C) .
Position unit injector sleeve (1) in the cylinder head. Use a hammer to install unit injector sleeve (1) in the cylinder head.Note: Allow Tooling (G) to cure for two hours at 21 °C (70 °F) before filling the engine with fuel or coolant. Longer curing time is required for lower temperatures.
Fill the cooling system with coolant to the correct level. Refer to Operation and Maintenance Manual, "Refill Capacities and Recommendations".End By: Install the unit injectors. Refer to Disassembly and Assembly, "Unit Injector - Install".