ALTERNATOR 1P4031 - Caterpillar

(1) Lubricate face and thread before assembly. Torque nut to ... 15 700 800 N m (11 560 590 lb ft)(2) Lubricate inside diameter and outside diameter with clean grease.(3) Lubricate sealing lip lightly with lubricant being sealed.(4) 6E0781 Bearing: Outside diameter ... 154.270 0.013 mm (6.0736 0.0005 in)Inside diameter ... 130.32 0.02 (5.131 0.001 in)Install bearing in bore ... 10.00 0.50 mm (0.394 0.020 in)(5) 6E0781 Bearing: Outside diameter ... 154.270 0.013 mm (6.0736 0.0005 in)Inside diameter ... 130.32 0.02 mm (5.131 0.001 in)Install bearing in bore ... 10.00 0.50 mm (0.394 0.020 in)(6) Apply 7M7456 sealant to wiper seal groove before assembly.(7) Install seals in bore ... 1.0 0.5 mm (0.04 0.02 in)(8) Slit of ring must turn in direction of piston.(9) Bore of head ... 150.63 0.03 mm (5.930 0.001 in)(10) Diameter of rod ... 149.930 0.038 mm (5.9028 0.0015 in)(11) Bore of cylinder ... 220.0 0.10 mm (8.66 0.004 in)