ALTERNATOR GROUP 1P7775 - Caterpillar

Illustration 1 g03177123
Table 1
Specification for 311-6036 Front Gear Gp
Item Qty Part Specification Description
1 2 348-7076 Front Adapter As After installation, bore of 348-7074 Bushing in the front adapter assembly is 75.035 mm (2.9541 inch).
Installation depth of the bushing is 3.6 0.5 mm (0.14 0.02 inch).
2 4 279-0768 Bolt Before assembly, lightly lubricate both sides of the 281-2712 Washer with clean engine oil.
Torque to 190 30 N m (140 22 lb ft).
3 2 281-2711 Washer Before assembly, lightly lubricate both sides of the washers with clean engine oil.
4 2 5P-8119 O-Ring Seal Before assembly, lightly lubricate the bores with the lubricant that is being sealed.
5 2 307-2402 Idler Gear As After installation, bore of 307-2403 Bushing in the idler gear assembly is 89.964 0.010 mm (3.5419 0.0004 inch).
Installation depth of the bushing is 2.3 0.5 mm (0.09 0.02 inch).
6 1 291-1998 Pump Adapter After installation, bore of 318-4810 Bushing in the pump adapter is 94.056 mm (3.7030 inch).
During assembly, flush the 8F-6575 Cup Plug with the pump adapter surface.
7 1 348-7075 Oil Pump Adapter After installation, bore of 348-7074 Bushing in the oil pump adapter is 75.023 mm (2.9537 inch).
Installation depth of the bushing is 0.5 0.5 mm (0.02 0.02 inch).
8 4 259-4598 O-Ring Seal Before assembly, lightly lubricate the bores with the lubricant that is being sealed.
9 2 277-6911 Idler Shaft Diameter is 89.88 0.02 mm (3.539 0.001 inch).
10 2 165-4852 O-Ring Seal Before assembly, lightly lubricate the bores with the lubricant that is being sealed.
11 4 281-3114 Bolt Before assembly, lightly lubricate both sides of the 281-2712 Washer with clean engine oil.
Torque to 190 30 N m (140 22 lb ft).
12 1 251-5516 Shaft Diameter of the shaft over 348-7074 Bushing side is 74.900 0.015 mm (2.9488 0.0006 inch).
13 1 246-6691 Pump Drive Shaft Diameter of the pump drive shaft over 348-7074 Bushing is 74.900 0.015 mm (2.9488 0.0006 inch).