20R0956 ALTERNATOR GP -B Caterpillar parts
Rating:
Alternative (cross code) number:
CA20R0956
20R-0956
20R0956
CA20R0956
20R-0956
20R0956
Weight: 19 pounds 8 kg.
Related part:
3660669
ALTERNATOR GP -B
20R0956
R
Compare Prices:
As an associate, we earn commssions on qualifying purchases through the links below
Aftermarket ATG11099 Alternator Compatible For Caterpillar C13 C15 C18 C9 C9.3 0124625081 0124625103 20R0956 366-0669 07992170 T400306
ZGHQHCDRH Energy saving and fuel efficiency: Equipped with intelligent power regulation function, it does not waste engine power, reduces fuel consumption, and saves costs for vehicle maintenance and repair. Universal Good Fit: It is compatible with the original model of the vehicle. Engineers don't need to repeatedly adjust. Installation can be completed within 1 hour. There is no need to wait for accessories or waste time. It quickly restores vehicle usage. || Hardly breakable and durable: The core coil is made of high-purity copper wire. The outer shell has been treated for corrosion and rust prevention. It is not afraid of high-temperature exposure or rain-soaked conditions, thus reducing the need for frequent repairs and replacements. || Stable Power Assurance: Whether it's starting at idle or driving at high speed, the power generation remains stable at all times. At the same time, it can power the navigation system, air conditioning, and mobile phone charging without any lag, completely avoiding the embarrassing situation of sudden power failure halfway. || Aftermarket ATG11099 Alternator Compatible For Caterpillar C13 C15 C18 C9 C9.3 0124625081 0124625103 20R0956 366-0669 07992170 T400306
ZGHQHCDRH Energy saving and fuel efficiency: Equipped with intelligent power regulation function, it does not waste engine power, reduces fuel consumption, and saves costs for vehicle maintenance and repair. Universal Good Fit: It is compatible with the original model of the vehicle. Engineers don't need to repeatedly adjust. Installation can be completed within 1 hour. There is no need to wait for accessories or waste time. It quickly restores vehicle usage. || Hardly breakable and durable: The core coil is made of high-purity copper wire. The outer shell has been treated for corrosion and rust prevention. It is not afraid of high-temperature exposure or rain-soaked conditions, thus reducing the need for frequent repairs and replacements. || Stable Power Assurance: Whether it's starting at idle or driving at high speed, the power generation remains stable at all times. At the same time, it can power the navigation system, air conditioning, and mobile phone charging without any lag, completely avoiding the embarrassing situation of sudden power failure halfway. || Aftermarket ATG11099 Alternator Compatible For Caterpillar C13 C15 C18 C9 C9.3 0124625081 0124625103 20R0956 366-0669 07992170 T400306
ATG11099 Alternator for C13 C15 C18 C9 C9.3 0124625081 0124625103 20R0956 366-0669 07992170 T400306
HBdzRE The ATG11099 alternator is compatible with engines such as the C13, C15, C18, C9, and C9.3. || It works with part numbers such as 0124625081 and 0124625103. || It is compatible with specifications such as 20R0956 and 366-0669. || It is also compatible with such as 07992170 and T400306. || It provides power to the corresponding engine's electrical system.
HBdzRE The ATG11099 alternator is compatible with engines such as the C13, C15, C18, C9, and C9.3. || It works with part numbers such as 0124625081 and 0124625103. || It is compatible with specifications such as 20R0956 and 366-0669. || It is also compatible with such as 07992170 and T400306. || It provides power to the corresponding engine's electrical system.
ATG11099 Alternator Compatible For Caterpillar C13 C15 C18 C9 C9.3 0124625081 0124625103 20R0956 366-0669 07992170 T400306
ZOHUIYO Stable voltage output: Under different operating conditions such as idle or high-speed driving, the voltage fluctuation is small, avoiding damage to on-board electrical appliances due to unstable voltage || Long lifespan: reduce replacement frequency and lower maintenance energy costs || Low noise operation: using low-noise fans and optimized bearing design to reduce cockpit noise interference || Easy to install structure: Standardized interface design, simplified replacement process, and reduced maintenance costs || ATG11099 Alternator Compatible For Caterpillar C13 C15 C18 C9 C9.3 0124625081 0124625103 20R0956 366-0669 07992170 T400306
ZOHUIYO Stable voltage output: Under different operating conditions such as idle or high-speed driving, the voltage fluctuation is small, avoiding damage to on-board electrical appliances due to unstable voltage || Long lifespan: reduce replacement frequency and lower maintenance energy costs || Low noise operation: using low-noise fans and optimized bearing design to reduce cockpit noise interference || Easy to install structure: Standardized interface design, simplified replacement process, and reduced maintenance costs || ATG11099 Alternator Compatible For Caterpillar C13 C15 C18 C9 C9.3 0124625081 0124625103 20R0956 366-0669 07992170 T400306
For full view, you need register
Information:
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Bellows Protector 1
Wear goggles, gloves, protective clothing, and a National Institute for Occupational Safety and Health (NIOSH) approved P95 or N95 half-face respirator when handling a used Diesel Particulate Filter or Catalytic Converter Muffler. Failure to do so could result in personal injury.
Do not strike any part of the assembly of the Diesel Particulate Filter (DPF). Do not allow any object to contact the internal element of the DPF. If the internal element of the DPF becomes damaged, the assembly must be replaced.
Ensure that all components are clean and free from wear and damage. If necessary, replace any components that are worn or damaged.
If the flexible exhaust pipe was removed as an assembly, refer to Disassembly and Assembly, "Flexible Exhaust Pipe - Remove and Install" for the correct installation procedure.
Illustration 1 g03017439
Illustration 2 g03017436
Illustration 3 g03022697
If necessary, install the temperature sensors (3) and temperature sensor (9) into the DPF. Refer to Disassembly and Assembly, "Temperature Sensor (DPF) - Remove and Install" for the correct procedure.
Position a new V-band clamp onto flexible exhaust pipe (8).
Attach a suitable lifting device to the assembly of the Diesel Particulate Filter (DPF) (6). The weight of the DPF is approximately 15 kg (33 lb).
Use the suitable lifting device in order to install the DPF to mounting bracket (12). Ensure that the flexible exhaust pipe is correctly seated onto the turbocharger and DPF with the alignment pin (13) (not shown) fully engaged. Note: Ensure that the exhaust gases flow in the direction of temporary mark.
Remove the suitable lifting device from the assembly of the DPF.
Position clamps (11) onto DPF (6). Loosely install bolts (10).
Loosely install the Original Equipment Manufacturer's (OEM) exhaust pipe assembly to outlet section (4) of the DPF.
Align the temporary alignment marks on DPF (6) and clamps (11) in Positions (A), (B), (C) and (D). Note: Ensure that the flexible exhaust pipe bellows are not subjected to any undue stress.
If a new DPF is being installed, the DPF must be aligned using flexible exhaust pipe (8) as the reference point. Note: Ensure that the flexible exhaust pipe bellows are not subjected to any undue stress.
Position the V-band clamp onto the DPF. Tighten the flexible exhaust pipe clamp. Refer to Disassembly and Assembly, "Flexible Exhaust Pipe - Remove and Install" for the correct procedure.
Tighten the OEM exhaust pipe assembly to the outlet section of the DPF. Refer to the OEM for the correct procedure.
Ensure that the DPF is installed in the original position and all of the temporary alignment marks are aligned. Note: Ensure that the flexible exhaust pipe bellows are not subjected to any undue stress.
Tighten bolts (10) evenly in three stages. Tighten bolts (10) to an initial torque of 8 N m (71 lb in)Tighten bolts (10) to a secondary torque of 16 N m (141.6 lb in)Tighten bolts (10) to a final torque of 25 N m (221 lb in).
If necessary, remove Tooling (A) from flexible exhaust pipe (8).
Connect the
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Bellows Protector 1
Wear goggles, gloves, protective clothing, and a National Institute for Occupational Safety and Health (NIOSH) approved P95 or N95 half-face respirator when handling a used Diesel Particulate Filter or Catalytic Converter Muffler. Failure to do so could result in personal injury.
Do not strike any part of the assembly of the Diesel Particulate Filter (DPF). Do not allow any object to contact the internal element of the DPF. If the internal element of the DPF becomes damaged, the assembly must be replaced.
Ensure that all components are clean and free from wear and damage. If necessary, replace any components that are worn or damaged.
If the flexible exhaust pipe was removed as an assembly, refer to Disassembly and Assembly, "Flexible Exhaust Pipe - Remove and Install" for the correct installation procedure.
Illustration 1 g03017439
Illustration 2 g03017436
Illustration 3 g03022697
If necessary, install the temperature sensors (3) and temperature sensor (9) into the DPF. Refer to Disassembly and Assembly, "Temperature Sensor (DPF) - Remove and Install" for the correct procedure.
Position a new V-band clamp onto flexible exhaust pipe (8).
Attach a suitable lifting device to the assembly of the Diesel Particulate Filter (DPF) (6). The weight of the DPF is approximately 15 kg (33 lb).
Use the suitable lifting device in order to install the DPF to mounting bracket (12). Ensure that the flexible exhaust pipe is correctly seated onto the turbocharger and DPF with the alignment pin (13) (not shown) fully engaged. Note: Ensure that the exhaust gases flow in the direction of temporary mark.
Remove the suitable lifting device from the assembly of the DPF.
Position clamps (11) onto DPF (6). Loosely install bolts (10).
Loosely install the Original Equipment Manufacturer's (OEM) exhaust pipe assembly to outlet section (4) of the DPF.
Align the temporary alignment marks on DPF (6) and clamps (11) in Positions (A), (B), (C) and (D). Note: Ensure that the flexible exhaust pipe bellows are not subjected to any undue stress.
If a new DPF is being installed, the DPF must be aligned using flexible exhaust pipe (8) as the reference point. Note: Ensure that the flexible exhaust pipe bellows are not subjected to any undue stress.
Position the V-band clamp onto the DPF. Tighten the flexible exhaust pipe clamp. Refer to Disassembly and Assembly, "Flexible Exhaust Pipe - Remove and Install" for the correct procedure.
Tighten the OEM exhaust pipe assembly to the outlet section of the DPF. Refer to the OEM for the correct procedure.
Ensure that the DPF is installed in the original position and all of the temporary alignment marks are aligned. Note: Ensure that the flexible exhaust pipe bellows are not subjected to any undue stress.
Tighten bolts (10) evenly in three stages. Tighten bolts (10) to an initial torque of 8 N m (71 lb in)Tighten bolts (10) to a secondary torque of 16 N m (141.6 lb in)Tighten bolts (10) to a final torque of 25 N m (221 lb in).
If necessary, remove Tooling (A) from flexible exhaust pipe (8).
Connect the
Parts alternator Caterpillar catalog:
Caterpillar
20R4764
ALTERNATOR GP -B
Caterpillar
Caterpillar
20R4763
ALTERNATOR GP -B
Caterpillar
Caterpillar
20R1726
ALTERNATOR GP -B
Caterpillar
Caterpillar
Caterpillar
20R4620
ALTERNATOR GP
Caterpillar
Caterpillar
Caterpillar
20R0955
ALTERNATOR GP -B
Caterpillar
Caterpillar
Caterpillar
Caterpillar
Caterpillar
20R2677
ALTERNATOR GP -B
Caterpillar
Caterpillar