ALTERNATOR GP-CHARGING 2176635 - Caterpillar

Illustration 25 g02987437
If your machine is equipped with auxiliary hydraulics, this control is used for the following implements:
Hydraulic Broom
Multipurpose bucket
Side dump bucket
Auxiliary hydraulics
Logging fork clampHydraulic Broom Control
FORWARD DETENT (1) - Push the lever into detent and release the lever to the HOLD position in order to activate continuous flow in this direction. Move the control lever out of the HOLD position in order to deactivate continuous flow.FORWARD (2) - Broom will push material toward the machine.HOLD (3) - The lever will return to this position when the lever is released. The attachment will remain in the selected position. If Continuous Flow has been activated, then the hydraulic circuit will remain active even though the lever is in the HOLD position.REARWARD (4) - Broom will push material away from the machine.REARWARD DETENT (5) - Push the lever into detent and release the lever to the HOLD position in order to activate continuous flow in this direction. Move the control lever out of the HOLD position in order to deactivate continuous flow.Note: Continuous Flow operation for the detents must be enabled for the active work tool selection. See the "Work Tool Control System" section for mode details.Note: Broom speed may be adjusted through the display. Refer to the "Work Tool Control System" section or to the "Display Settings" section for more information.Multipurpose Bucket Control
CLOSE - Move the lever to position 2 in order to close the bucket.HOLD - The lever will return to position 3 when the lever is