ALTERNATOR GP-CHARGING 2463199 - Caterpillar

For specific information on your host machine, refer to the Operation and Maintenance Manual of your host machine.
Note: Use the locking device for the rotator only for transporting the shear.
Illustration 1 g01652493
Illustration 2 g01444357
When you transport the shear on the host machine, position the shear so the stick can be moved under the boom and the boom can be carried as low as possible.When you must transport the shear on another vehicle, the jaws of the shear should be closed. Position the shear flat on the bed of the vehicle.Shears are equipped with a locking device (1) in order to lock the rotator. The locking device (1) prevents the upper housing from moving when the shear is transported. The location of the locking device (1) for each model is shown in the following illustration.Rotate the shear until the devices that lock the rotator are aligned. Install the locking device (1) for the rotator. Close the jaws of the shear.
Illustration 3 g01722093
VHS-30/3 and VHS-40/3 Locking device for rotator
Illustration 4 g01722097
VHS-50/3 Locking device for rotator
Illustration 5 g01444317
VHS-60/3 and VHS-70/3 Locking device for rotatorNote: Before you put the shear into operation, the locking device (1) must be removed.