ALTERNATOR GP 2493328 - Caterpillar

Table 1
New Parts List    
Item     Quantity     Part Number     Part Name    
1     1     461-9908 (1)     Floor Mat Assembly    
2     1     461-9909 (1)     Floor Mat Assembly    
-     1     461-9906 (2)     Floor Mat Assembly    
-     1     461-9907 (2)     Floor Mat Assembly    
( 1 ) Used for 797F machines
( 2 ) Used for 793F and 795F machines
Illustration 1 g03773717
New floor mat assemblies are adaptable to machines and effective in production with machines that are listed in Table 2.
Table 2
Sales Model     Adaptable to Machines     Effective in Production with Machines    
793F AC     S/N:EMD1-77     S/N:EMD78-UP    
793F     S/N:SND1-131     S/N:SND132-UP    
S/N:SSP1-1073 S/N:SSP1074-UP    
S/N:RBT1-171 S/N:RBT172-UP    
795F AC     S/N:ERM1-296     S/N:ERM297-UP    
797F     S/N:LAJ1-559     S/N:LAJ560-UP    
S/N:WSP1-129 S/N:WSP130-UP    Use the following rework procedure in order to install the new floor mat assemblies on the above listed adaptable machines.Rework Procedure
Illustration 2 g03773721
Remove three 9X-2041 Screws (B), 7X-7729 Washer (C), and 304-7806 Footrest As (A). Save all parts.
Remove floor mounted pedestal (D) (if equipped). Save the part.
Remove 343-3175 Floor Mat (E) from the floor. Discard the part.
Illustration 3 g03773722
Use a grinder to remove 339-6176 Plate (F) for supporting heel from the cab. Smooth out the floor in that area and paint, then discard plate (F) .
Illustration 4 g03773725
Install new floor mat assembly (1) on the operator side as shown in Illustration 4.
Install new floor mat assembly (2) on the trainer side as shown in Illustration 4.
Install floor mounted pedestal (D) (if equipped) that was saved in Step 2.
Install 304-7806 Footrest As (A) using three 9X-2041 Screws (B) and three 7X-7729 Washers (C) that were saved in Step 1.