3015158 ALTERNATOR GP-CHARGING Caterpillar parts
CB-54, CB-64
Rating:
Alternative (cross code) number:
CA3015158
301-5158
3015158
CA3015158
301-5158
3015158
VIBRATORY COMPACTOR,
Number on catalog scheme:
For full view, you need register
Caterpillar SIS machinery equipment:
Caterpillar SIS
CB54 Vibratory Compactor JLM00001-UP (MACHINE) POWERED BY C4.4 Engine »
301-5158
ALTERNATOR GP-CHARGING
CB64 Vibratory Compactor DJM00001-UP (MACHINE) POWERED BY C4.4 (MECH) Engine »
301-5158
ALTERNATOR GP-CHARGING
CB54 Compactor K3J00001-UP (MACHINE) POWERED BY C4.4 Engine »
301-5158
ALTERNATOR GP-CHARGING
CB64 Compactor CB500001-UP (MACHINE) POWERED BY C4.4 Engine »
301-5158
ALTERNATOR GP-CHARGING
Caterpillar parts catalog:
Information:
Illustration 17 g00589202
Install 5 clamps (21) for the wiring harness. Connect wire connector (22). Install wire connector (22) to the clip. Install hose (23). Install the O-ring.
Illustration 18 g00589200
Illustration 19 g00590395
Install 5 clamps (17) for the wiring harness. Install hose (18). Install the O-ring. Install 4 bolts and the half clamps for hose (18). Install hose (20). Install the O-ring. Install hose clamp (19) .
Illustration 20 g00589193
Install hose (16). Install the O-ring. Install 4 bolts and the half clamps for hose (16) .
Illustration 21 g00589189
Install hose clamp (15) for the transmission oil cooler hose.
Illustration 22 g00589172
Oil Cooler
Install hose (14). Install the O-ring. Install 4 bolts and the half clamps for hose (14).
Illustration 23 g00589155
Scavenge Pump
Install hose (13). Install the O-ring. Install 4 bolts and the half clamps for hose (13).
Illustration 24 g00589144
Install hose (11). Install the O-ring. Install hose (12). Install the O-ring.
Illustration 25 g00589102
Illustration 26 g00589112
Install the exhaust elbow. Install two bolts (8) at the rear of the exhaust elbow. Install four bolts (9) for the exhaust pipe. Install two bolts (10) and the hose clamp at the front of the exhaust elbow.
Illustration 27 g00589125
Install the muffler. Install muffler clamp (7) .
Illustration 28 g00591451
Attach appropriate nylon lifting slings and a hoist to the transmission cover assembly (4). Install the transmission cover assembly. The assembly weighs 40 kg (88 lb).
Install the strut. Install the two nuts that secure strut (5) to the machine.
Illustration 29 g00589003
Install four bolts (3), the washers and the nuts for the transmission cover.
Install the cover (6). Install 6 bolts, the washers, and the nuts.
Install tube (2) onto the machine. Install four clamps (1).
Fill the transmission and transfer gear with the specified lubricant. The oil level must be checked several times after filling the transmission in order to ensure a proper fill. Refer to Operation and Maintenance Manual, SEBU7064, "Lubricant Viscosities and Refill Capacities" for further information.End By:
Install the front drive shaft. See Disassembly and Assembly, "Front Drive Shaft - Remove and Install".
Install the main drive shaft. See Disassembly and Assembly, "Main Drive Shaft - Remove and Install".
Install the hitch drive shaft. See Disassembly and Assembly, "Hitch Drive Shaft - Remove and Install".
Parts alternator Caterpillar catalog:
216, 216B, 232B, 242B, 3024C, 3054C, 3054E, 3056E, AP-300D, C4.4, CB-54, CB-64
2717077
ALTERNATOR GP-CHARGING
3054C, AP-300
3054C, AP-300
AP555E, BG500E, C4.4, CS-54
3011C, C1.1, CB-14
2985109
ALTERNATOR GP-CHARGING
AP-300D, C4.4
AP-300D, C4.4
7C5796
ALTERNATOR GP-CHARGING
3208, PS-500
3208, PS-500
3241511
ALTERNATOR GP-CHARGING
CP-44, CS-44
CP-44, CS-44
3062320
ALTERNATOR GP-CHARGING
420E, AP555E, BG500E, C4.4, M313D, M315D, M315D 2, M317D 2
420E, AP555E, BG500E, C4.4, M313D, M315D, M315D 2, M317D 2