3035774 ALTERNATOR GP-CHARGING Caterpillar parts
C4.4, D3K XL, D4K XL, D5K LGP
Rating:
Alternative (cross code) number:
CA3035774
303-5774
3035774
CA3035774
303-5774
3035774
INDUSTRIAL ENGINE, TRACK-TYPE TRACTOR,
Compatible equipment models: 3035774:
Number on catalog scheme:
For full view, you need register
Information:
Removal Procedure
Start By:
Remove the fan. Refer to Disassembly and Assembly, "Fan - Remove and Install".
Remove the alternator. Refer to Disassembly and Assembly, "Alternator - Remove".
Remove the crankshaft pulley. Refer to Disassembly and Assembly, "Crankshaft Pulley - Remove and Install".
Remove the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install".
Remove the timing gears. Refer to Disassembly and Assembly, "Gear Group (Front) - Remove and Install".
Remove the fuel injection pump. Refer to Disassembly and Assembly, "Fuel Injection Pump - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Ensure that the coolant is drained into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change" for the correct procedure.
Illustration 1 g01337982
Typical example
Remove bolts (1) that secure bypass tube (2) to front housing (3). Note the position of any brackets that are secured by the bolts. Remove bypass tube (2). Remove O-ring seals (4) and (5) from bypass tube (2).
Illustration 2 g01350333
If the engine is equipped with a heavy duty idle gear. Remove plate (6). Refer to Disassembly and Assembly, "Idler Gear - Remove" for the correct procedure.
Illustration 3 g01350336
Typical example
Remove bolts (8), (9) and (10) from front housing (3). Note: The bolts are three different lengths. Note the positions of the different bolts.
Remove front housing (3) from the cylinder block.
Remove joint (7).
Illustration 4 g01350337
Typical example
Remove thrust washer (11) from the cylinder block.
Start By:
Remove the fan. Refer to Disassembly and Assembly, "Fan - Remove and Install".
Remove the alternator. Refer to Disassembly and Assembly, "Alternator - Remove".
Remove the crankshaft pulley. Refer to Disassembly and Assembly, "Crankshaft Pulley - Remove and Install".
Remove the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install".
Remove the timing gears. Refer to Disassembly and Assembly, "Gear Group (Front) - Remove and Install".
Remove the fuel injection pump. Refer to Disassembly and Assembly, "Fuel Injection Pump - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Ensure that the coolant is drained into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change" for the correct procedure.
Illustration 1 g01337982
Typical example
Remove bolts (1) that secure bypass tube (2) to front housing (3). Note the position of any brackets that are secured by the bolts. Remove bypass tube (2). Remove O-ring seals (4) and (5) from bypass tube (2).
Illustration 2 g01350333
If the engine is equipped with a heavy duty idle gear. Remove plate (6). Refer to Disassembly and Assembly, "Idler Gear - Remove" for the correct procedure.
Illustration 3 g01350336
Typical example
Remove bolts (8), (9) and (10) from front housing (3). Note: The bolts are three different lengths. Note the positions of the different bolts.
Remove front housing (3) from the cylinder block.
Remove joint (7).
Illustration 4 g01350337
Typical example
Remove thrust washer (11) from the cylinder block.
Caterpillar SIS machinery equipment:
Caterpillar SIS
C4.4 Industrial Engine 44400001-UP »
303-5774
ALTERNATOR GP-CHARGING
D5K XL & LGP Track Type Tractors JLF00001-UP (MACHINE) POWERED BY C4.4 Engine »
303-5774
ALTERNATOR GP-CHARGING
D3K XL & LGP Track Type Tractors FFF00001-UP (MACHINE) POWERED BY C4.4 Engine »
303-5774
ALTERNATOR GP-CHARGING
D4K XL & LGP Track Type Tractor MMM00001-UP (MACHINE) POWERED BY C4.4 Engine »
303-5774
ALTERNATOR GP-CHARGING
Caterpillar parts catalog:
Parts alternator Caterpillar catalog:
216, 216B, 232B, 242B, 3024C, 3054C, 3054E, 3056E, AP-300D, C4.4, CB-54, CB-64
416D, 416E, 420D, 420E, 420F, 422E, 424D, 428D, 428F, 430E, 430F, 432D, 432F, 434E, 434F, 442D, 444F, 450E, D3K XL, D4K XL, D5K LGP
3054C, 3054E, 3056E, 414E, 416D, 416E, 416F, 420D, 420E, 420F, 422E, 422F, 424D, 428D, 428E, 428F, 430D, 430E, 430F, 432D, 432E, 432F, 434E, 434F, 442D, 442E, 444E, 444F, 450E, C4.4, C6.6, CB-54B, D3K...
3054C, 3054E, 420E, 914G, AP-600D, AP-655D, AP1000E, AP1055E, AP555E, BG500E, BG600D, BG655D, C4.4, C6.6, CP-56, CP-76, CS-54B, CS-64, CS-74, IT14G, IT14G2, M313D, M315C, M315D, M315D 2, M316D, M317D ...
3054, 3054B, 3054C, 3054E, 3056, C3.3, C4.4, SPF343C
C4.4, C6.6
3024C, 3054C, 3054E, 315C, AP555E, BG500E, C2.2, C4.4, CP-573E, CP-663E, CS-323C, CS-423E, CS-54, CS-563E, CS-583E, CS-663E, CS-683E
3054C, 3054E, 3056E, 312D2, 312D2 GC, 312D2 L, 313D2, 313D2 LGP, 318D2 L, AP-650B, AP-800D, BB-760, C4.4, CP-433E, CP-533E, CP-573E, CP-663E, CS-423E, CS-433E, CS-533E, CS-563E, CS-583E, CS-663E, CS-6...
3397768
ALTERNATOR GP-CHARGING
3054C, AP-300, C4.4
3054C, AP-300, C4.4
2706310
ALTERNATOR GP-CHARGING
904B, 904H
904B, 904H
2701865
ALTERNATOR GP-CHARGING
904B, 904H
904B, 904H
2378262
ALTERNATOR GP-CHARGING
914G, IT14G
914G, IT14G
3196910
ALTERNATOR GP-CHARGING
572R II
572R II
3117455
ALTERNATOR GP-CHARGING
C4.4, SPF343C
C4.4, SPF343C