ALTERNATOR GP-CHARGING 3079902 - Caterpillar

TYPE="LEVEL" DEPTH="1" @@@-->Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
ZZ 5P-2299 Flared Plug 2
3R-6789 Flared Cap 2 Note: SERVICE DATA: TOOLING (ZZ) WILL NOT BE IDENTIFIED IN PHOTOGRAPHS IN THE REMOVAL OR THE INSTALLATION. THIS TOOLING IS SHOWN IN ORDER TO ASSIST THE EXPERIENCED SERVICEMAN.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01092716
Disconnect hose (1) and hose assemblies (3) from marine transmission oil cooler (2).
Disconnect tube assemblies (5).
Remove bolts (4) and marine transmission oil cooler (2). Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01092716
Position marine transmission oil cooler (2) on the bracket assembly. Install bolts (4).
Connect tube assemblies (5).
Connect hose assemblies (3) and hose (1) to marine transmission oil cooler (2).